A wall-mounted tablet is the obvious Home Assistant dashboard, and it is the wrong one for a hallway. The backlight glows all night, the battery dies in a day, and the screen wants a cable you then have to hide. E-paper flips that trade. The best e-ink display for Home Assistant draws nothing while it holds an image, so a 7.5-inch panel on a 2000 mAh cell can run for months. The cost is that it refreshes every few minutes instead of every frame.
We compared the three devices people actually shortlist, TRMNL, the Seeed reTerminal E1001 and Soldered’s Inkplate, plus two cheaper panels that run the same firmware. The question that separates them is not the panel size. It’s how the image gets there: TRMNL’s server-rendered screenshot, ESPHome drawing widgets on the device, or both. Specs, prices and firmware support were checked against the makers’ stores, their docs and the TRMNL firmware release current in October 2026. That also makes this a sensible list for a homelab gift before Black Friday.
Which e-ink display fits Home Assistant best
Read the firmware column first, because it decides how much work the dashboard will be. TRMNL firmware shows a picture someone else rendered, while ESPHome lets you place entity values on the panel yourself. Two of the three main picks can run either. Prices are US bands from the maker stores and Amazon on October 31, 2026, and stock on the Seeed devices moves daily, so check the live price before you order.
| Award | Display | Panel | Firmware options | Battery (maker figure) | Price band |
|---|---|---|---|---|---|
| Best overall | TRMNL OG | 7.5″, 800×480, 4 grays | TRMNL (cloud or self-hosted) | 1800 mAh, 2 to 6 months | about $139 direct |
| Best value for ESPHome | Seeed reTerminal E1001 | 7.5″, 800×480, mono | ESPHome, TRMNL, SenseCraft, Arduino | 2000 mAh, up to 3 months | about $69 at Seeed |
| Sharpest and largest | Soldered Inkplate 10 | 9.7″, 1200×825, 8 grays | ESPHome, Arduino, MicroPython | battery sold separately | about €190 direct, bare board |
| Cheapest TRMNL panel on Amazon | Seeed XIAO 7.5″ ePaper Panel | 7.5″, 800×480, mono | TRMNL, ESPHome, Arduino | 2000 mAh, up to 3 months | about $75 to $80 |
| For a Raspberry Pi you already run | Waveshare 7.5″ e-Paper HAT | 7.5″, 800×480, 4 grays | TRMNL Linux client, Pi scripts | none, mains powered | about $70 |
If you want something that works the evening it arrives, the TRMNL OG is the answer, and the reTerminal E1001 is the one we would pick for an ESPHome tinkerer on a budget. The Inkplate 10 earns its price only when you want more pixels than 800×480 gives a busy dashboard.
How a Home Assistant dashboard reaches an e-ink panel
None of these devices runs the Home Assistant frontend. An ESP32 has no browser, and a full e-paper refresh takes about one to five seconds on the monochrome panels here. So the device either receives a finished bitmap or draws a small set of widgets itself. Which of the two you use changes what you design in, where it renders and whether anything leaves your network.

The screenshot path is the one TRMNL documents, and it works in order:
- The add-on captures a dashboard: the TRMNL HA add-on, based on Paulus Schoutsen’s puppet add-on, logs in with a long-lived access token, screenshots a Lovelace view in headless Chromium and dithers it for e-paper.
- It pushes the image to a server: a webhook sends the bitmap to the TRMNL cloud’s Home Assistant Screenshot plugin, or to Terminus if you self-host.
- The device polls on its own clock: it wakes, asks the server for the current image, draws it and goes back to sleep, on an interval between 5 minutes and 24 hours.
The detail that matters for security is the direction of every arrow. According to TRMNL’s own description of the protocol, the device only ever calls the server, and the plugin page states that nothing reaches into your network from outside. The add-on’s Web UI on port 10000 has no authentication of its own, so its README tells you to use Ingress and never forward that port.
ESPHome works the other way round. Home Assistant opens a connection to the device’s native API on port 6053, pushes entity states as they change, and the firmware draws text, icons and graphs with ESPHome’s display lambdas. You get live values with no cloud and no browser in the loop, but you lay out every pixel in YAML, and a pretty Lovelace card you already built does not carry over. The add-on also offers a pull-mode fetch URL, so an ESPHome device can download the same dithered screenshot instead, which is how people mix the two models.
How these displays were chosen
We started from what Home Assistant users search for and compare, which is TRMNL against the reTerminal and both against Inkplate. A device made the list only if its maker documents a Home Assistant path today, through ESPHome, the TRMNL add-on or both. Panel, chip, battery and refresh figures come from the maker spec pages and wikis linked in each section. Firmware support comes from the TRMNL docs, the Seeed wiki and the ESPHome component list, and US prices from the maker stores and Amazon on October 31, 2026.
Two candidates dropped out. M5Stack’s PaperS3 is marked end of life on M5Stack’s own store, and we could not confirm a current spec page for the LILYGO T5 4.7-inch S3 board, so neither gets a recommendation here.
1. Why the TRMNL OG is the best overall
The TRMNL OG is a finished product in a way the others are not. It arrives assembled in its own case and already runs its firmware. The hosted service also has a Home Assistant Screenshot plugin next to calendars, weather and to-do lists, so a Lovelace view can share a playlist with your calendar.
Inside is an ESP32-C3 driving a 7.5-inch, 800×480 panel that TRMNL lists with fast refresh and four gray levels. The store quotes 2 to 6 months on the 1800 mAh battery, and a 2500 mAh upgrade is sold as an add-on. The firmware is open source under GPL-3.0 on GitHub, with release 1.8.18 tagged on October 30, 2026, and its README estimates about 120 days at a 15-minute refresh on the larger cell.
What you pay for that polish is a dependency. By default the device talks to TRMNL’s servers, and the Home Assistant image travels there by webhook before the panel downloads it. If that bothers you, TRMNL publishes a bring-your-own-server spec and its own Terminus server. Terminus is a Ruby app on PostgreSQL that runs under Docker and is still labelled beta, and it keeps the whole loop on your LAN. We would start on the cloud service and move to Terminus once you know which screens you actually use.
Who it is for: anyone who wants a Home Assistant view on a wall or desk without writing YAML, and the obvious gift for someone who already runs Home Assistant. Skip it if you want live sensor values with no server hop, or you would rather spend half the money on a reTerminal and do the layout yourself. It sells for about $139 direct from TRMNL, with no Amazon listing, so check the live price on the store. The 10.3-inch TRMNL X at about $229 steps up to 1872×1404 and 16 grays, though TRMNL says European and Asian orders are backlogged, so check availability before you plan it as a gift.
2. Why the reTerminal E1001 is the best value for ESPHome
Seeed’s reTerminal E1001 costs about half a TRMNL and carries more hardware. It is the device we would hand to someone who already writes ESPHome YAML, because Seeed documents that path first and the board has the memory to do it comfortably.

The Seeed wiki lists an ESP32-S3 with 8 MB of PSRAM and 32 MB of flash, a 7.5-inch 800×480 monochrome panel, and a 2000 mAh battery. Around them sit a microSD slot, three buttons, a buzzer and a temperature and humidity sensor. That sensor is the quiet win. Under ESPHome it shows up in Home Assistant as a pair of entities, so the dashboard also becomes a room sensor, and the buttons can flip pages or trigger automations.
It is not locked to one ecosystem either. Seeed’s own firmware is the no-code SenseCraft dashboard, the wiki carries an ESPHome cookbook and an Arduino guide, and TRMNL’s web flasher supports it from firmware 1.6.7. Running TRMNL on it needs a $50 BYOD licence from TRMNL, though, unless you point it at your own Terminus server, so a “cheap TRMNL” plan should count that in. TRMNL’s store listed that licence as sold out on October 31, 2026. Seeed rates the battery at up to three months on its default settings without naming the refresh interval, so expect less from a dashboard that wakes every few minutes.
The E1001 suits ESPHome users who want sensors and buttons on the panel, and buyers who would like the option to switch firmware later. It is the wrong pick for colour: the E1002 at about $99 has a 7.3-inch Spectra 6 panel that Seeed’s wiki rates at about 15 to 20 seconds per full refresh, with no partial refresh. The E1001 itself is a gamble if you need it this week, since Seeed’s store flipped between in stock and backorder on October 31, 2026. Expect about $69 at Seeed, and check the live price and stock there; we found no Amazon listing for it.
3. When the Inkplate 10 is worth the extra money
An 800×480 screen runs out of room fast once a dashboard holds a calendar, a weather block and a few graphs. Soldered’s Inkplate 10 is the pick when that is the problem, because it packs 1200×825 pixels onto 9.7 inches and handles greyscale well enough for photos and smooth graph lines.

Soldered’s documentation gives a 1.61-second full refresh, partial updates, a 22 µA deep-sleep current, a real-time clock and an onboard Li-ion charger. The board and its software are open source. ESPHome has a dedicated inkplate display component that lists the Inkplate 10 among its models, with a 3-bit greyscale mode (eight shades). The community homeplate project runs a Home Assistant and TRMNL dashboard on these boards.
Two details catch buyers out. The panel is recycled from e-reader stock, and Soldered warns that minor scratches are possible. And the bare board is exactly that, because the battery and enclosure come in a separate kit. Soldered sells the board alone for about €190, and the version with an enclosure and battery was sold out on October 31, 2026. Both are direct only, with no Amazon listing. Partial refresh is also ignored in ESPHome’s greyscale mode, so a dashboard that wants both smooth shading and quick updates has to pick one.
Buy the Inkplate 10 for dense dashboards, photo frames that double as status boards, or because you like open hardware. If a 7.5-inch screen already holds your dashboard, the extra pixels cost roughly three times the reTerminal’s price. Check the live price on Soldered’s store before you order.
4. What the XIAO 7.5″ ePaper Panel offers on Amazon
The XIAO 7.5″ ePaper Panel is Seeed’s earlier, simpler take on the same 800×480 monochrome screen, and it is the cheapest TRMNL-compatible device you can order through Amazon. Seeed’s wiki describes it with a PLA 3D-printed case around the panel.
According to Seeed’s wiki for the panel, a XIAO ESP32-C3 drives the screen from a 2000 mAh battery that Seeed rates at up to three months in deep sleep. The wiki lists ESPHome with Home Assistant, Arduino and TRMNL firmware (with the same BYOD licence). Compared with the reTerminal E1001 you give up the S3’s PSRAM, the sensor, the buttons and the more finished case, so the reTerminal is the better buy whenever both are available.
Pick the XIAO panel when Amazon shipping and returns matter and the screen will sit on a desk. When the reTerminal is in stock at Seeed, the reTerminal costs less and does more. It is about $80 on Amazon and about $75 direct, so check the live price.
5. Why a Waveshare HAT only makes sense next to a Pi
The Waveshare 7.5-inch e-Paper HAT is a bare panel plus a driver board for the Raspberry Pi header. There is no battery and no ESP32, so it suits one situation well: a Pi that already sits on a shelf running Pi-hole or a Zigbee bridge, with power and a spare GPIO header.

Waveshare’s spec page lists 800×480 pixels, four grey levels and a four-second full refresh over SPI. TRMNL’s own Linux client, trmnl-display, lists the Waveshare SPI e-paper HAT as a target and fetches screens from TRMNL’s cloud (with a BYOD licence) or from your own Terminus server. Because the Pi is a full Linux box, a small script that pulls the TRMNL HA add-on’s fetch URL works too. The catch is everything around the panel. You build the frame, run the software and keep a Pi powered, so it is a project rather than a finished display, and a poor gift for anyone who doesn’t already want one.
Pi owners who want a status screen on hardware they already run will get the most from it. Anywhere without a mains socket, look at the battery picks above instead. It sells for about $70 on Amazon; check the live price.
What to check before you buy an e-ink dashboard
The spec sheets all say 7.5 inches and Wi-Fi, so the differences hide in a few lines most listings bury. These are the ones that decide whether the dashboard still works in month three:
- Which firmware paths the maker documents: a device with ESPHome and TRMNL guides from its maker gives you a way out if one ecosystem stops suiting you, while a board with neither means writing your own.
- What the battery figure assumes: Seeed’s “three months” comes with default settings and no stated interval, while TRMNL’s README pegs about 120 days to a 15-minute refresh on 2500 mAh, so look for the interval behind the number.
- Grey levels against resolution: 1-bit panels show dithering patterns on photos and graphs, 4-level panels soften them, and 8 or 16 levels on a denser panel look closest to print.
- Hidden licence costs: running Seeed or Waveshare hardware against TRMNL’s cloud needs a $50 BYOD licence, which closes most of the price gap with a real TRMNL OG.
- Colour refresh time: Spectra 6 colour panels such as the reTerminal E1002 take tens of seconds and flash during a refresh, which is fine for a photo frame and slow for a dashboard.
Whichever you pick, the Home Assistant host matters more than the panel, because the screenshot add-on runs a headless Chromium on it. Its README asks Proxmox users to set the VM’s CPU type to host for Chromium to start, and a small box from our mini PC guide for Home Assistant has the headroom. If you run Home Assistant in containers, the add-on also ships as its own image, which fits the setup in our Home Assistant on Docker Compose walkthrough.
Where an e-ink dashboard is the wrong screen
E-paper is a status display, and most disappointments come from asking it to be a control panel. Three misconceptions show up again and again in Home Assistant threads.
It won’t show a light switching in real time
On the screenshot path, a change has to wait for the next capture, then the next device poll, so a door opening can take one or two refresh intervals to appear. ESPHome devices can redraw on a state change, but every redraw costs battery. If you want to tap a light and watch it react, buy one of the screens in our tablet dashboard guide and keep the e-ink panel for the hallway.
A Lovelace view won’t look the same on paper
Cards designed for a glowing screen rely on colour, thin fonts and pale borders, and dithering turns those into noise on a 1-bit panel. A dedicated dashboard with large text, high contrast and no background images reads far better, which is why the TRMNL add-on ships per-device presets. Plan on building one view just for the panel.
“Local” depends on the firmware, not the device
The same reTerminal E1001 is fully local under ESPHome and cloud-dependent under hosted TRMNL. Say your rule is that every device keeps working with the internet down, as with the sensors in our air quality monitor roundup or a local Zigbee coordinator. Then choose ESPHome or run Terminus yourself, and treat the hosted TRMNL plugin as a convenience you can switch off later.

