Repository navigation
Releases
v7.3.1
v7.3.1 - 2026-10-22
This is a patch release with a single PR to unschedule Hoodi testnet Glamsterdam fork activation. Mainnet operators do not need to update to this release if they are running v7.3.0 already.
For more information about Hoodi testnet fork activation delay, please read the Ethereum Foundation blog post on this topic.
Changed
- Unschedule the Gloas fork on Hoodi, per eth-clients/hoodi#33. [PR]
v7.3.0
v7.3.0 - 2026-10-16
This release schedules the Gloas fork on Hoodi at epoch 132352 (2026-10-26 17:42:48 UTC), with a 200M gas limit from the fork. Hoodi operators must update their beacon nodes and validator clients before then.
On networks that have forked into Gloas, beacon nodes and validator clients must be upgraded together. The V1 GetExecutionPayloadEnvelope and PublishExecutionPayloadEnvelope gRPC endpoints now return FAILED_PRECONDITION, so an older validator client cannot sign envelopes against this beacon node. Pre-Gloas networks are unaffected.
This release includes fixes that apply to mainnet. We recommend that mainnet operators update their beacon nodes to this release as soon as possible.
Release highlights:
- Gloas fork on Hoodi at epoch 132352, with a 200M gas limit schedule entry. [PR]
- Validator client duty-aware shutdown: on SIGINT/SIGTERM the validator client waits up to 8 seconds for the current slot's rewarded duties to finish. A second interrupt stops immediately.
--disable-duty-aware-shutdownturns it off. [PR] --enable-archiveruns the beacon node as an archive node. It backfills blocks to--archive-origin-state(genesis by default) and regenerates every historical state. [PR]- Checkpoint sync from an unfinalized checkpoint. [PR]
- Gloas builder circuit breaker per direct connection endpoint, with new
--builder-*failure and blacklist flags. [PR] - New Beacon API endpoints for Gloas:
ptc,proposer_preferences,builder_pending_withdrawalsandbuilder_pending_payments. See the Added section below. - P2P fixes. See the Fixed section below.
--dev,--holesky, the terminal total difficulty and block hash override flags, and several flag aliases are deprecated. They still work. [PR]- Consensus spec v1.7.0-beta.4. [PR]
Added
- Add
beacon_payload_gas_limitandbeacon_payload_gas_usedmetrics, set from each received execution payload (block body before Gloas, payload envelope from Gloas). [PR] - Log the gas utilization in the
Synced execution payload envelopelog. [PR] - Validator client: duty-aware shutdown. On SIGINT/SIGTERM, postpone the shutdown until the rewarded duties (attestation, sync committee message, block proposal) of the current slot are done, and either at least 3 seconds are left before the next slot or the next slot has no rewarded duty, so that a quick restart does not miss any rewarded duty. The shutdown is postponed by at most 8 seconds. A second interrupt stops immediately. Use
--disable-duty-aware-shutdownto opt out. [PR] - Broadcast a pending block on the fork digest of its own slot instead of the current fork's, so a block resolved from the pending queue after a fork transition is not sent on a topic where peers cannot decode it. [PR]
- Support for checkpoint syncing from an unfinalized checkpoint. [PR]
- Added
GET /eth/v1/beacon/states/{state_id}/builder_pending_withdrawalsandGET /eth/v1/beacon/states/{state_id}/builder_pending_paymentsBeacon API endpoints for Gloas states (beacon-APIs#655). [PR] - Gloas builder circuit breaker now tracks which builder indices each direct connection endpoint serves. [PR]
- New beacon flags
--builder-allowed-failures,--builder-critical-failures,--builder-blacklist-period,--builder-critical-blacklist-period,--builder-relay-blacklist-period,--builder-failure-backoff-periodand--builder-critical-failed-builders. [PR] - New
--disable-builder-relay-circuit-breakerflag to turn endpoint tracking off, andbuilder_relays_banned_count/builder_collateral_blacklisted_countmetrics. [PR] - From Gloas onwards, the SSE
blockevent includesbuilder_indexandblock_hashfrom the block's execution payload bid, per beacon-APIs#641. [PR] - Add
safe_block_hashandfinalized_block_hashto thepayload_attributesSSE event from Gloas onwards, per beacon-APIs #638. [PR] - Add
GET /eth/v1/beacon/states/{state_id}/ptcendpoint returning the payload timeliness committee for a slot, with JSON and SSZ responses, per beacon-APIs #657. [PR] --enable-archiveturns the node into an archive node: it backfills blocks down to--archive-origin-state(genesis by default) and regenerates every historical state into the state-diff tree. Implies--enable-state-diffand--enable-backfill. [PR]- Custom types for more compact representation (marshaled ssz byte slice) of ExecutionPayload.Transactions. [PR]
GetExecutionPayloadEnvelopeV2andPublishExecutionPayloadEnvelopeV2gRPC endpoints using these new types. [PR]- Schedule the Gloas fork on Hoodi at epoch 132352 (2026-10-26 17:42:48 UTC) with a 200M gas limit schedule entry. [PR]
- Add
HEZE_FORK_VERSIONandHEZE_FORK_EPOCHconfig placeholders for the Heze fork, set to far-future on all networks, so upcoming Heze features (EIP-7805, EIP-8015, EIP-8365) can be gated on the fork epoch. [PR] - Added
GET /eth/v1/beacon/proposer_preferencesBeacon API endpoint to retrieve known signed proposer preferences (beacon-APIs#659). [PR]
Changed
BeaconState*(Phase0 through Gloas),HistoricalBatch,SigningData,ForkData,DepositMessageandPowBlockinproto/prysm/v1alpha1are now hand-written SSZ structs and no longer implementproto.Message. Use.Copy()andequality.DeepEqualinstead ofproto.Cloneandproto.Equal. On-disk and wire formats are unchanged. [PR]StateSummary,PendingAttestationandSyncAggregatorSelectionDatamoved out of the deletedbeacon_state.protointobeacon_core_types.proto,attestation.protoandsync_committee.proto(same Go package, field numbers and wire format). [PR]- Request Gloas builder-API execution payload bids in parallel with the local payload. [PR]
- Fall back to the best of the builder-API bid and the cached P2P bid when the local payload is unavailable during a Gloas proposal. [PR]
- Align
data_column_sidecars_by_rangebatch sizing with the blocks and blob sidecars by range handlers. [PR] - Reworded the validator client warning for builders with no
max_execution_paymentto state the default of 0 and that their bids may lose to the local payload. [PR] - Consolidate the Gloas envelope-matching helpers into
BlockBuiltOnParentEnvelope. The initial-sync fetcher consistency check now also requires the envelope's beacon block root to equal the block's parent root. [PR] - Replace the per-call
Broadcasted data column sidecarsdebug log with aBroadcasted data column sidecars summarylog, aggregated per block root and emitted once no column was broadcast for this root during 100 ms. [PR] - Decode gossiped beacon blocks under the block validation lock. [PR]
- Decode gossiped execution payload envelopes under a validation lock. [PR]
- Remove the experimental status of the
--enable-state-diffflag. [PR] ExecutionPayloadGloas.transactionsis now aProgressiveTransactionListunder a new protobuf field tag; tag 14 is reserved. Any external code that imports ExecutionPayload and interacts with the Transactions field expecting a [][]byte will need to be updated. [PR]- Note: Validator clients and beacon nodes must be upgraded together on networks that have forked into Gloas networks; pre-Gloas networks are unaffected. The V1
GetExecutionPayloadEnvelopeandPublishExecutionPayloadEnvelopegRPC endpoints now returnFAILED_PRECONDITION. A validator client that still calls them predates the new encoding and would otherwise sign envelopes with an empty transaction list. [PR] - Remove the
MAX_DATA_COLUMN_SIDECAR_SIZEandMAX_PARTIAL_DATA_COLUMN_SIDECAR_SIZEpresets dropped by the spec. [PR] - Prettify
--help. ...
v7.2.1
v7.2.1 - 2026-10-05
This release focuses on Gloas builder configuration in the validator client. If you are testing Gloas builders, update to this release so your builder auth configuration is read correctly: proposer settings files now take builder auth_data and builder_pubkeys as 0x-hex, matching the keymanager API, instead of base64.
Partial data columns are now on by default: data columns are gossiped at the cell level, so nodes can send and receive the cells they have instead of whole columns. To fall back to full column gossip, use --disable-partial-data-columns. --partial-data-columns is deprecated and has no effect.
This release also adds the Sepolia GAS_LIMIT_SCHEDULE, so validators default to a 200M gas limit from the Sepolia Gloas fork (epoch 353024, October 6, 2026, 13:53:36 UTC). This needs no action. To use a different gas limit, set gas_limit in your proposer settings, set it through the keymanager API, or use --suggested-gas-limit.
Release highlights:
- Partial data columns (cell-level PeerDAS dissemination) are on by default.
--disable-partial-data-columnsturns them off.--partial-data-columnsis deprecated and has no effect. [PR] - Proposer settings files take builder
auth_dataandbuilder_pubkeys(renamed frompubkeys) as 0x-hex instead of base64, matching the keymanager API. Review your builder settings before updating. [PR] - The default builder
auth_datais derived from the builder URL's hostname instead of the full URL, per builder-specs#168. Builder URLs without a hostname are rejected. [PR] - New validator client flags
--builder-urls,--builder-min-bid,--builder-boost-factorand--builder-max-execution-paymentconfigure Gloas builders for all validators. Builder auth data can be appended to a URL as a#0x...hex fragment. [PR] --builder-bid-timeouton the beacon node sets how long to wait for builder bids. The default wait is now 600ms, up from 300ms. [PR]- Sepolia
GAS_LIMIT_SCHEDULE: 200M gas limit at epoch 353024.--suggested-gas-limitnow also applies from Gloas on, where it overrides the schedule. [PR] [PR] - Gloas fixes, including block production for the first Gloas block and historical state replay when hierarchical diffs are missing. See the Fixed section below.
Added
- Added support for Gloas Partial Columns. [PR]
- Add
--builder-bid-timeoutflag to the beacon node, making the time spent waiting for execution payload bids from builder relays configurable. Only effective from the Gloas fork onward. [PR] - Gloas-compatible light-client proof generation for progressive SSZ containers. [PR]
- Validator client flags
--builder-urls,--builder-min-bid,--builder-boost-factorand--builder-max-execution-paymentto configure Gloas builders for all validators from the command line. Builder auth data can be appended to a URL as a#0x...hex fragment. Before Gloas a non-empty--builder-urlslist also enables builder registration. Default builder settings, from these flags or a settings file, apply per run; a restart without them does not carry them over from the validator DB. [PR] - Gloas: reject proposer preferences whose dependent block is after the shuffling dependent slot. [PR]
- Add Gloas light-client protobuf and SSZ types, wrappers, and fork-specific branch accessors. [PR]
- Sepolia
GAS_LIMIT_SCHEDULE: 200M gas limit at epoch 353024 (Gloas fork), matching eth-clients/sepolia. [PR]
Changed
- Derive the default builder
auth_datafrom the builder URL's hostname instead of the full URL bytes, per builder-specs#168. [PR] - Reject builder URLs without a hostname (
https://:8080) or with a non-ASCII one. Internationalized hostnames must be punycode-encoded. [PR] - Marshal states directly behind their DB version key when saving, removing one full copy of the state bytes per save. [PR]
- Return 400 instead of 500 from
GET /eth/v1/beacon/blinded_blocks/{block_id}for Gloas blocks, and fromGET /eth/v3/validator/blocks/{slot}for Gloas slots, per beacon-APIs#651. [PR] - Increase the default Gloas builder bid wait from 300ms to 600ms. [PR]
GetFeeRecipientByPubKeynow reads the proposer preferences cache instead of the beacon DB.PrepareBeaconProposerhas written to that cache rather than the DB for some time, so the endpoint returned the default fee recipient on any node that never ran an older Prysm. [PR]- Cell-level dissemination for PeerDAS data columns (partial data columns) is now enabled by default. Use
--disable-partial-data-columnsto fall back to full column gossip. [PR] - Deprecated
--partial-data-columns; partial data columns are now the default, so the flag is a no-op. [PR] - Reuse cached level-zero state-diff snapshots when their slot matches the requested snapshot, avoiding a database read. [PR]
--suggested-gas-limitsets the default gas limit from the Gloas fork onward as well, where it overrides the network gas limit schedule (EIP-8261); remove the flag to follow the schedule. The validator client warns at startup when the flag is set on a network with Gloas scheduled, and when the value exceeds the highest scheduled gas limit. Like the builder defaults, the default gas limit applies per run. [PR]- Made state diff cache anchors slot aware, so it's possible to identify slot missmatch before decompressing. [PR]
- Updated
go-libp2p-pubsubtov0.18.0. [PR] - Avoid rescanning appended values in multi-value slices by using cached per-object lengths. [PR]
- Skip payloads the execution client no longer has when serving Gloas execution payload envelopes by root instead of failing the whole request. [PR]
- Use EL validation instead of forkchoice for optimistic status of incoming payload. [PR]
- Refreshed
.well-known/security.txt: the security contact is now prysm@offchainlabs.com, two stale PGP keys were removed, and anExpiresfield was added as required by RFC 9116. [PR] - Check required hierarchical diff records before loading full snapshots to avoid repeated large decodes while searching for available historical states. [PR]
Deprecated
--disable-registration-cacheis deprecated and now has no effect. The validator registration cache is always used; registrations are no longer persisted to the beacon DB. [PR]
Removed
- Removed the unreachable validator registration and fee recipient beacon DB paths:
RegistrationByValidatorID,SaveRegistrationsByValidatorIDs,FeeRecipientByValidatorID,SaveFeeRecipientsByValidatorIDs, and theregistrationandfee-recipientbuckets. [PR] - Removed the
tools/eth1exporteraddress balance Prometheus exporter. It was unrelated to beacon chain eth1data handling, had no build, CI, or deployment wiring outside a manual Bazel image target, and defaulted to the retired Holesky endpoint. [PR]
Fixed
- Join every data column topic before broadcasting a proposal's columns, so partial columns on topics the proposer is not subscribed to are actually sent instead of silently reaching no peers. [PR]
- Use
PROPOSER_REORG_CUTOFF_BPSinstead of a hardcoded 2s cutoff when deciding to orphan a late head. [PR] - Serve the chain tip's execution payload envelope in
ExecutionPayloadEnvelopesByRangeresponses when fork choice selects the tip's full payload variant, per thePAYLOAD_STATUS_FULLhead condition of consensus-specs#5608. [PR] - The validator client REST server now returns 404 for unknown paths (including unknown
/api/*paths) instead of an empty 200 when the web UI is disabled. [PR] - Return
204 No Contentfrom keymanagerDELETE /eth/v1/validator/{pubkey}/graffition success, as required by the keymanager API spec. [PR] - Initialize the finalized dependent root from the startup anchor block's parent root. [PR]
- gRPC
GetDutiesand `GetDu...
v7.2.0
v7.2.0 - 2026-09-25
This release schedules the Gloas fork on the Sepolia testnet at epoch 353024 (October 6, 2026, 13:53:36 UTC). Sepolia operators are required to update to v7.2.0 before the fork, and must also run an execution client that supports the corresponding Amsterdam fork on Sepolia. Gloas is not yet scheduled for Hoodi or mainnet; operators of those networks are encouraged to update per their regular update cadence.
Sepolia gas limit: the Sepolia Gloas configuration published upstream on September 24 adds an EIP-8261 GAS_LIMIT_SCHEDULE entry that raises the network gas limit to 200M at the fork. That entry landed after this release was cut and is not included in v7.2.0, so validators on this release default to a 60M gas limit in their Gloas proposer preferences. Sepolia validators who want to propose with a 200M gas limit must set it explicitly at the option level: add "gas_limit": "200000000" to default_config (or to a key under proposer_config) in a version 2 proposer settings file loaded with --proposer-settings-file or --proposer-settings-url, or set it through the keymanager API with POST /eth/v1/validator/{pubkey}/gas_limit. An explicitly configured gas limit is honored as configured. Note that --suggested-gas-limit only applies to pre-Gloas mev-boost registrations and has no effect after the fork. A follow-up release will include the schedule.
Release highlights:
- Gloas fork scheduled on Sepolia at epoch 353024 (October 6, 2026, 13:53:36 UTC). [PR]
- Validator client support for Gloas builders: version 2 proposer settings, per-key builder configuration through the keymanager API, the Gloas builder REST endpoints, remote signing (web3signer) of Gloas blocks and a builder circuit breaker.
--with-builder,--enable-builderand--suggested-gas-limitonly produce legacy (pre-Gloas) mev-boost content and are deprecated. - Proposer settings loaded from
--proposer-settings-fileor--proposer-settings-urlnow reject unknown keys; review your proposer settings before updating. [PR] - Active-active REST validator client: with
--enable-beacon-rest-apiand several--beacon-rest-api-providernodes, the validator client uses the best suited connected beacon node instead of failing over from a single active node. [PR] - Web3Signer public keys can be polled from the remote signer with
--validators-external-signer-poll-interval, and keys are tracked per source. [PR] - The fast confirmation rule, behind the
--enable-fast-confirmationflag. [PR] - The EF bootstrap nodes for mainnet, Sepolia and Hoodi are replaced with the NodeOps bootnode fleet. [PR]
- Performance: SSZ marshalling and hash tree roots are now generated by
methodical-ssz, hashtree is updated to v0.2.6, per-element hash tree roots of large SSZ lists are computed in parallel, and the state-diff (hdiff) path uses sparse validator diffs with less transient memory. - go-libp2p updated to v0.50.0. [PR]
- Numerous bug fixes, including a checkpoint-synced node with
--enable-state-diffand--beacon-db-pruningfailing to restart, Electra attestation packing by marginal proposer reward, and beacon API endpoints returning the correctfinalizedflag and404instead of500for unknown states. See the Fixed section below.
Added
- progressive merkleization of beacon state. [PR]
- Support SSZ-encoded request bodies (
Content-Type: application/octet-stream) for thePOST /eth/v2/beacon/pool/attestationsendpoint (Electra and later). [PR] - progressive merkleization for expected withdrawals. [PR]
- progressive merkleization for builder pending withdrawals. [PR]
- progressive merkleization for builders. [PR]
- Log when sending FCU with payload attributes on late blocks and trigger an SSE event for the attributes. [PR]
- Enforce Web3Signer users to set flags correctly on startup. [PR]
- Add AttestationGloas. [PR]
- Added IndexedAttestationGloas | AttesterSlashingGloas and replaced usage in codebase. [PR]
- Cache the progressive Merkle tree for the Gloas beacon state and its validator/balance field tries, so a hash tree root after a small mutation recomputes only the affected subtrees. [PR]
- version guards for beacon state progressive HTR. [PR]
- Bash script for automating the version upgrade process. [PR]
- Support the optional EIP-8261
GAS_LIMIT_SCHEDULEconfig as the epoch-based default and recommended maximum gas limit for gloas proposer preferences. [PR] --builder-header-timeout: makes the buildergetHeadertimeout (BUILDER_PROPOSAL_DELAY_TOLERANCE, previously hardcoded to 1s) configurable. Must be greater than 0. Only effective up to the Fulu fork. [PR]--disable-graffiti-client-appendbeacon node flag, to stop appending consensus and execution client version information to the block graffiti. [PR]- Record Gloas data column KZG proof verification time in the existing
beacon_kzg_verification_data_column_batch_millisecondshistogram. [PR] - Accept SSZ (
application/octet-stream) request bodies onPOST /eth/v2/validator/aggregate_and_proofs. The body is decoded as the SSZList[SignedAggregateAndProof], fork-versioned by theEth-Consensus-Versionheader. [PR] - Expose
CONFIRMATION_BYZANTINE_THRESHOLD,MAX_SIGNED_AGGREGATE_AND_PROOF_SIZE,MAX_ATTESTER_SLASHING_SIZE,MAX_DATA_COLUMN_SIDECAR_SIZE,MAX_PARTIAL_DATA_COLUMN_SIDECAR_SIZEandMAX_SIGNED_EXECUTION_PAYLOAD_BID_SIZEin the/eth/v1/config/specbeacon API endpoint. [PR] execution_payload_valuefield andEth-Execution-Payload-Valueheader in theproduceBlockV4response, per ethereum/beacon-APIs#631. [PR]tools/genception, aGOPACKAGESDRIVERthat answersgo/packagesqueries from a Bazel-supplied package inventory, so code generators that load types throughgo/packagescan run inside the Bazel sandbox. [PR]- Validator client: keys added through a keymanager reload are now held out of duties until a doppelganger check clears them (behind
--enable-doppelganger). [PR] - Gloas builder circuit breaker: blacklist builders that win an auction but never reveal the payload. [PR]
- The REST VC now submits
POST /eth/v2/validator/aggregate_and_proofswith an SSZ request body, falling back to JSON when the beacon node rejects SSZ. [PR] - Add
GET/POST/DELETE /eth/v1/validator/{pubkey}/builderskeymanager endpoints for per-key builder configuration (keymanager-APIs #88). The endpoints respond 501 on networks without a scheduled gloas fork, where builder configuration cannot take effect. [PR] - Per-validator
validator_failed_envelope_submissionsmetric counting failed self-build envelope submissions (omitted under--disable-account-metrics). [PR] - Prune the state-diff tree along with the rest of the historical data when
--beacon-db-pruningis enabled. [PR] --submit-blacklisted-builder-bidshidden feature flag to skip the builder circuit breaker check inSubmitSignedExecutionPayloadBid, so a blacklisted builder can still broadcast its bid for testing that peers do not propagate it. [PR]- Support POST on
/eth/v4/validator/blocks/{slot}with aBuilderConfigbody and return the winning builder in theEth-Builder-Urlresponse header, per beacon-APIs #630. [PR] - Add
POST /eth/v1/validator/builder_preferencesto forward per-builder preference entries to their builders. [PR] - Read the
Eth-Builder-Urlrequest header in the block publishing endpoints to submit the signed block to the winning builder. [PR] - Add
--validators-external-signer-poll-interval(alias:--remote-signer-poll-interval) to periodically poll the public keys from the remote signer public-keys URL. Defaults to0(disabled). [PR] - Connect the REST validator client to the Gloas builder endpoints: block requests carry the
BuilderConfigvia POST, theEth-Builder-Urlheader is read from block product...
v7.1.8
v7.1.8 - 2026-07-27
This is a highly recommended patch release containing multiple bug fixes improving the handling of early attestations for better inclusion. Several other bugfixes and ux improvements are also included. Some highlights:
- libp2p bug fixed, improving network-wide propagation of early attestations. [PR]
- Bug fix enabling validator clients using grpc to make timely attestations (resolving notification stream connection issues).
- Builder client now automatically falls back to JSON when a remote builder rejects SSZ requests (415/406), so builders without SSZ support (e.g. Commit Boost) work without needing
--disable-builder-ssz. - Numerous UX / quality of life improvements (see Added and Changed sections below).
- Miscellanious small bugfixes (see the Fixed section below)
- And of course, changes related to the upcoming gloas fork, including support for partial data columns (more efficient blob networking) and progressive merkleization.
Added
- Gate the
--distributedvalidator client flag when used without the REST API being enabled. [PR] - Added shorter flag aliases:
--beacon-rest,--beacon-grpc, and--enable-rest. [PR] - Add
GET /prysm/v1/node/custodyendpoint exposing the node's data column custody state: custody group count, custody groups and columns, earliest available slot, supernode/semi-supernode status, and backfill progress. [PR] - Builder client now automatically falls back to JSON when a remote builder rejects SSZ requests (415/406), so builders without SSZ support (e.g. Commit Boost) work without needing
--disable-builder-ssz. CoversGetHeader,RegisterValidator,SubmitBlindedBlock,SubmitBlindedBlockPostFulu, and the GloasGetExecutionPayloadBidandSubmitBuilderPreferencesendpoints. Once a builder rejects SSZ, the client uses JSON for the remainder of its lifetime. [PR] - Reorg late payloads in Gloas behind the
--reorg-late-payloadsflag when the PTC did not reach timeliness consensus. [PR] - progressive merklization functions in the ssz package. [PR]
- progressive SSZ merkleization for Gloas beacon state. [PR]
- hidden, experimental beacon node flag
--enable-progressive-sszto. [PR]
Changed
- GET /eth/v1/validator/payload_attestation_data/{slot} now returns 204 instead of 503 when no block has been seen for the requested slot, per ethereum/beacon-APIs#612. [PR]
- Setting
--beacon-rest-api-providernow implicitly enables the beacon REST API, so--enable-beacon-rest-apiis optional. [PR] - Changed the
producePayloadAttestationDataendpoint to takeslotas a query parameter instead of a path parameter, per the latest beacon-APIs spec. [PR] - Verify the proposer signature of by-root blocks before adding them to the pending queue. [PR]
- Removed the blinded execution payload envelope publish flow in favor of publishing the full signed envelope or envelope contents, per beacon-APIs #624. [PR]
- Envelope publish endpoint now returns after broadcast, moving local import off the RPC path. [PR]
- Updated geth to v1.17.4. [PR]
- Updated
go-libp2p-pubsubtov0.17.0, which allows republishing a previously seen but never delivered message (e.g. an attestation ignored because its block had not arrived yet). [PR] - Reduce the Gloas Engine API get-payload timeout to 300 milliseconds. [PR]
--max-builder-consecutive-missed-slotsand--max-builder-epoch-missed-slotshelp text: Reports the mainnet config value as the default instead of a hardcoded, false and unused values. [PR]- Validator client now retries only the failed next-epoch duties independently instead of re-pulling every duty, making duty updates resilient to transient beacon node errors. [PR]
- Upgrading to go 1.26.5 with security and bugfixes: see golang changelog. [PR]
Deprecated
--interop-num-validators,--interop-start-index,--interop-eth1data-votesand--interop-write-ssz-state-transitionsare now hidden no-ops. Use ethereum-package for interop/devnet testing. [PR]
Removed
- Removed the interop keymanager, mocked eth1 data votes, the SSZ state-transition dump helpers (
tools/extractor), and theinteropchain-config preset. [PR] - Unused
data_column_obtained_via_el_countmetric that was never recorded. [PR]
Fixed
- Fixed flaky pending attestation bucket tests by asserting on specific log messages instead of exact global log counts. [PR]
- Reset the self-build envelope signature failure budget every slot instead of tying it to a prune path that rarely runs. [PR]
- Set the bid gas limit on full forkchoice nodes restored via
MarkFullNode, so bid validation no longer sees a zero parent gas limit after a restart. [PR] - Fail the block data column availability check during initial sync instead of waiting indefinitely, so checkpoint sync no longer stalls when a block's custody columns are missing. [PR]
- Ignore Gloas data column sidecars from a future slot before queueing, preventing pending entries that are never pruned. [PR]
- Wait for the clock before starting the pending Gloas columns pruning routine to avoid a nil clock panic on startup. [PR]
- Apply the Gloas cross-fork state-diff pending_deposits against the anchor's pre-upgrade list, fixing a panic and state corruption when builder deposits are onboarded at the Fulu to Gloas fork with
--enable-state-diff. [PR] - Re-verify builder deposit signatures when an in-batch index reuse evicts a pubkey. [PR]
- Stop downscoring peers when pending Gloas data columns are pruned for a block root this node has not imported. [PR]
- Validator client now restarts its beacon event stream after a fallback host switch or after the stream dies. Previously the stream stayed bound to the old beacon node until a full restart, silently stopping head and payload-availability events โ and with them reorg-triggered proposer-preference resubmission โ even though the rest of the client kept working against the new node. [PR]
- A replaced event stream is now stopped and drained before its successor starts, so two streams can never feed the validator client's event loop concurrently, and a stream shutdown can no longer close the shared events channel out from under its replacement. [PR]
- Fail payload reconstruction in Gloas if correctness cannot be guaranteed. [PR]
- Validator client with the beacon REST API now fetches proposer duties from the v2 endpoint post-Gloas, so its dependent root is fork-aware and consistent with attester duties. [PR]
- Guard against a nil block dereference in Gloas execution payload envelope and data column gossip validation. [PR]
- Do not queue blocks that arrive earlier than the max clock disparity. Also move HTR computation after the timestamp check. [PR]
- Reject future-slot execution payload envelopes fetched by root and enforce pending caps, preventing an unbounded pending-envelope memory exhaustion. [PR]
- Remote web3signer keymanager:
NewKeymanagernow waits for the key-file watcher to initialize before returning and fails startup immediately if the watcher cannot be initialized, key-update notifications are sent without holding the keymanager lock, and keys are reloaded from the key file when the watcher recovers from a failure. This prevents a startup race, a potential lock-ordering deadlock, and a stale flag-only key set after watcher recovery. [PR] - Clarified
validator accounts exitprompts and final log message when--exit-json-output-diris set: signed exits are only written to files and are not broadcast, so the messaging no longer implies validators were exited. [PR] - Fix a panic in `GET...
v7.1.7
v7.1.7 - 2026-07-13
This patch release focuses on Beacon API interoperability, validator-client resilience, and a broad round of Gloas (ePBS) correctness and stability improvements.
Release highlights:
- Gloas and builder APIs: Added external builder bid selection and per-builder maximum execution payments, improved payload bid and attestation validation, and strengthened missing-payload and data-column recovery paths.
- Partial data columns: Drop messages for unsubscribed topics before SSZ decoding, preventing large partial messages for non-custodied subnets from blocking the shared gossip loop. [PR]
- Beacon API and validator client: Added SSZ support for proposer preferences, payload attestations, and validator balances; switched REST validator clients to
head_v2with automatic legacy fallback; and added replacement hints for removed routes. - Resilience and failover: Re-push proposer preferences after beacon-node failover, retry failed submissions, accelerate unknown-parent recovery, and prevent startup, REST-handler, builder-registry, and peer-address edge-case failures.
- Database startup recovery: Prevent a startup panic when the database returns a nil head block without an error; Prysm now logs the invalid head and starts fork choice from the finalized checkpoint instead. [PR]
- Operator experience: Reduced noisy beacon-node and validator-client logs, added clearer Gloas bid-selection and envelope-publication diagnostics, documented ordered REST endpoint failover, and improved error reporting for invalid P2P IP configuration.
Added
- Accept SSZ (
application/octet-stream) request bodies onPOST /eth/v1/validator/proposer_preferences, matching beacon-APIs #608. [PR] - Add
max_execution_paymentto the proposer builder config, the maximum execution-layer payment a proposer will accept from a Gloas builder. [PR] - Submit per-builder proposer preferences and signed request auths from the validator client ahead of Gloas proposals, and forward the matching request auth in the block request. [PR]
- Queue payload attestations received before their beacon block and process them once the block arrives. [PR]
- Pull execution payload bids from external builders during Gloas block production, select the best of self-build, P2P, and Builder-API bids, and submit the signed block back to the winning builder. [PR]
- Added SSZ (
application/octet-stream) response support to GET and POST/eth/v1/beacon/states/{state_id}/validator_balances(beacon-APIs #622). [PR] - Add a proactive request for the payload if we haven't seen it by the payload time. [PR]
make build [<bin>...] [flags=...]: Build Prysm binaries without Bazel. [PR]make run <bin> [flags=...] [-- <args>]: Build and run a Prysm binary without Bazel. [PR]- Add
ConnectionCounterto the REST connection provider andConnectionGenerationto the validator client interface, exposing a monotonic counter that advances on each beacon-node fallback switch (the gRPC provider already hadConnectionCounter). [PR] - Respond with
410 Goneand a message naming the replacement route when a Beacon API route that was removed from the spec (e.g.GET /eth/v1/beacon/blocks/{block_id},POST /eth/v1/beacon/pool/attestations,GET /eth/v2/validator/blocks/{slot}) is requested, instead of a bare404 Not Found. [PR]
Changed
- Validator client submits proposer preferences as SSZ by default, falling back to JSON if the beacon node returns 415. [PR]
- Validator client submits payload attestations as SSZ by default, falling back to JSON if the beacon node returns 415. [PR]
- Validator client requests
payload_attestation_dataas SSZ, decoding either an SSZ or JSON response. [PR] - Retain
BuilderConfig(relays, enabled, max execution payment) when upgrading proposer settings from v1 to v2 instead of dropping it. [PR] - Request a block's unknown parent by root immediately on gossip arrival instead of waiting for the pending-blocks queue tick. [PR]
- REST Validator client now subscribes to the
head_v2beacon API event by default instead of the deprecatedheadevent. If the beacon node does not supporthead_v2(it rejects the subscription with HTTP 400), the validator client automatically falls back to the legacyheadevent, so it keeps working against older beacon nodes with no behavior change. [PR] - The payload_attributes event no longer includes parent_block_number from the gloas fork onwards. [PR]
- Document that
--beacon-rest-api-provideraccepts comma-separated endpoints for ordered failover. [PR] - Cleaned up Gloas proposer flow logs: consistent verbs,
self-buildbuilder index rendering, single bid selection line with source and gwei value, and publish duration on envelope reveal. [PR] - Consolidated validator client submission logs: sync committee messages, sync contributions, and payload attestations are now summarized as one info line per distinct submission content per slot (with range-compressed validator indices), and the previous per-validator success logs were downgraded to debug level. [PR]
- Run
isAggregatorcheck concurrently invalidator.subscribeToSubnetsmethod body. [PR] make gen: Cache generation inputs to skip re-generating files that are already up to date. [PR]- Ignore instead of reject execution payload bids whose fee recipient does not match proposer preferences. [PR]
- Update C-KZG to
v2.1.8. [PR]
Removed
- Remove the unused top-level
max_execution_paymentproposer-option field in favor of the per-builderBuilderConfig.max_execution_payment. [PR] - Removed proposer index cache. [PR]
Fixed
- Accept SSZ (
application/octet-stream) request bodies onPOST /eth/v1/beacon/pool/payload_attestations. The handler already decoded SSZ, but the route only registered JSON so SSZ submissions were rejected with 415. [PR] - Allow SSZ responses on
GET /eth/v1/beacon/pool/payload_attestations. The handler already supported SSZ, but the route's Accept negotiation only allowed JSON, making the SSZ response unreachable. [PR] - Request the data column sidecars needed to validate a payload envelope when we do not already have them. [PR]
- Ignore execution payload bids that cannot be verified against the current head state instead of rejecting them. [PR]
- Return
execution_optimisticcorrectly for reward APIs (block, attestation, sync committee). [PR] - Emit the correct
parent_block_hashin the Gloaspayload_attributesSSE event by carrying the exact hash sent to the engine, so it matches for a full head instead of reporting the parent's hash. [PR] - avoid panic when event stream request creation fails #16234. [PR]
- Stop logging skipped
payload_attributesevents for past proposal slots as anERROR("received an event it was unable to handle") in the beacon node event stream. TheerrPayloadAttributeExpiredskip is now excused likeerrNotRequested, removing high-volume noise under ePBS. Theevent_typelog field now prints the event type (%T) instead of dumping the full event struct. [PR] - Fixed the attestation rewards API
ideal_rewardsresponse for Electra compounding validators with effective balances above 32 ETH. [PR] - Submit the signed block to the winning builder even when local block processing fails after broadcast. [PR]
- Drop partial data column messages for unsubscribed topics before the SSZ decode so the shared gossip loop is not head-of-line-blocked. [PR]
- Recover from nil headblock in db at startup. [PR]
- Accept builder preference submissions without the
--http-mev-relayflag, gloas builders are dialed per URL from the req...
v7.1.6
v7.1.6 - 2026-07-01
This patch release contains targeted gossip-validation, sync, and operator-facing improvements, alongside continued Gloas (ePBS), PeerDAS/data-column, builder API, and performance work from the release candidate.
Release highlights:
- Gloas and builder APIs: Continued Gloas block-production separation, stateless Gloas gRPC support, builder execution request types, builder API clients, proposer preferences, execution payload bid events, and payload-attestation handling.
- Beacon API and operator polish: Added SSZ-QL proof and length-query support, improved event-subscription error reporting, and introduced the
--postpone-shutdown-for-proposalsflag to defer graceful shutdown around upcoming proposal duties. - PeerDAS and data columns: Improved pending-column handling, sidecar validation, RPC reconstruction paths, rebroadcast behavior, bounded availability waits for Gloas data columns, and cell-level data column dissemination via the
--partial-data-columnsflag. - Stability and performance: Reduced allocations in randomness, KZG, and fork-choice paths; bounded Engine API capability growth; fixed trusted-peer address handling; and improved sync behavior around payload requests and unavailable payloads.
To learn more about how --partial-data-columns save bandwidth by exchanging selected cells and proofs, see Prysm docs
Operators are encouraged to update to this release as soon as practical.
Added
- Add
--postpone-shutdown-for-proposalsflag. When set, a graceful shutdown signal (SIGINT/SIGTERM, e.g. Ctrl-C on Linux) is postponed while a validator controlled by a connected validator client still has a block proposal duty in the current or next epoch. [PR] - Added optional Merkle proof support to the SSZ-QL BeaconBlock query endpoint. [PR]
FieldTrie: AddProveFieldthat returns leaf and proof for given field index. [PR]- Emit the
execution_payload_bidevent on the beacon node event stream when a builder bid is received from gossip; the topic was previously subscribable but never produced. [PR] - Add Gloas builder API protobuf types and the request-auth signature domain. [PR]
- Use Partial Messages for Data Column Gossip. [PR]
- Add the Gloas builder API HTTP client and the proposer-settings max_execution_payment field. [PR]
- Add the
SubmitBuilderPreferencesvalidator RPC, forwarding proposer builder preferences to the configured builder and caching the per-validator max execution payment. [PR] - SSZ-QL: support
len()queries on the BeaconState and BeaconBlock query endpoints, returning the runtime length of a List (element count) or Bitlist (bit count) as an 8-byte little-endian value. [PR] - Add
GetExecutionPayloadBidandSubmitSignedBeaconBlockto the beacon node builder service, wrapping the Gloas builder API client and selecting the per-builder request auth. [PR] - Fire an
execution_payload_bidevent when POSTing to/eth/v1/beacon/execution_payload_bids. [PR] - Gloas: reject
execution_payload_bidgossip when the builder version is notPAYLOAD_BUILDER_VERSION, the blob KZG commitment count exceeds the per-slot limit, orprev_randaodoes not match the RANDAO mix. [PR] - Builder execution requests (EIP-8282): builders are onboarded and exited via
BuilderDepositRequest/BuilderExitRequestin the GloasExecutionRequests, replacing the deposit-credential and voluntary-exit onboarding paths. [PR] - Use the
HasBlobsEngine API to quickly advertise missing cells. [PR] - hot state db for state diff. [PR]
- Gossip-level validation (slot, bid consistency, builder signature) on
POST /eth/v1/beacon/execution_payload_envelopesfor the default andbroadcast_validation=gossiplevels; failures return 400 and the envelope is not broadcast. [PR] broadcast_validation=gossipon the block publish endpoints now verifies the proposer signature before broadcast (previously a no-op); the default level is unchanged. [PR]- Gloas block production falls back to a cached P2P execution payload bid when the local EL self-build is unavailable. [PR]
- gRPC support for the
--statelessgloas self-build path (previously REST-only), serving both. [PR] - Add a NextSlotStateReadOnly interface to allow read-only access to the next slot state. [PR]
SubscribedValidatorsCachetracks attached validators viabeacon_committee_subscriptionsfor CGC andvalidating()computation, but has prepare_beacon_proposer populating in case of using an old validator client. [PR]validator_indicesfield onCommitteeSubnetsSubscribeRequest(gRPC): a flat list of attached validators, independent of the (slot, committee) subnet dedup, so the BN cache tracks every attached validator. [PR]
Changed
- Check the network size up front when computing subnet topic scoring params, replacing the per-subnet "rate is 0" warning spam with a single debug line that includes the active and required validator counts. [PR]
- proposer settings no longer recognize the builder option post gloas and introduces a new gas_limit option for proposer preferences, supported per validator and in the default config. [PR]
- the builder gas_limit and the new top-level gas_limit are independent signals: relay registrations keep reading builder.gas_limit pre-gloas, while proposer preferences read only the top-level gas_limit (falling back to the default config, then the chain default). [PR]
- gas limit keymanager endpoint continues to update gas limit on a per validator basis post gloas. [PR]
- v1 proposer settings files remain supported without modification: a deprecation warning is logged on gloas-scheduled networks and settings are upgraded automatically in the validator client at the gloas fork, promoting builder gas limits to the top level unless one is already set. Settings already on v2 are never rewritten. [PR]
- During initial sync, check execution payload envelope data column availability synchronously and fail if columns are missing instead of blocking. [PR]
- Double the global per-peer RPC rate limit (5 โ 10 req/s, burst 10 โ 20). [PR]
- Builder API requests and responses now use SSZ encoding by default. Use
--disable-builder-sszto fall back to JSON. [PR] - Deprecated
--enable-builder-ssz(alias--builder-ssz); SSZ is now the default for builder setups, so the flag is a no-op. [PR] - Optimize deterministic randomness helpers to reduce runtime overhead and allocations in
crypto/random. [PR] - Update consensus spec tests to
v1.7.0-alpha.11, aligning Gloas with the release: splitExecutionRequestsinto a Gloas-specificExecutionRequestsGloas(with builder requests) leaving Electra/Fulu at three fields, addBuilderPendingPayment.proposer_index, validate execution payload bids againststate.slot/PAYLOAD_BUILDER_VERSION, and setMAX_BUILDER_DEPOSIT_REQUESTS_PER_PAYLOADto 256. [PR] - Remove the unused builder deposit-signature prefetch path (
DepositSigcache,prefetchDepositSignatures, andBatchVerifyDepositRequestSignatures), dead since Gloas stopped onboarding builders via the validator deposit path. [PR] - Batch-verify builder deposit request signatures in
ProcessBuilderDepositRequestsinstead of one BLS verification per request. [PR] - Split Gloas and pre-Gloas block production into separate
buildBlockGloasandbuildBlockFulupaths. [PR] - Avoid a redundant 128 KiB blob copy and heap allocation in the KZG batch verification path by copying each blob directly into the preallocated destination. [PR]
- Avoid cloning a slice just to count it in the Gloas fork-choice best-descendant walk:
updateBestDescendantConsensusNodeandtipsnow use ahasConsensusChildrenhelper instead oflen(allConsensusChildren(...)), removing a per-node heap allocation. [PR] - CGC and `validating(...
v7.1.5
v7.1.5 - 2026-06-16
This release is dominated by Gloas (ePBS) fork development, alongside broad performance and memory optimizations, additional Beacon API event and endpoint support, and a round of gossip-validation and concurrency hardening.
Release highlights:
- Gloas (ePBS): End-to-end stateful self-build, execution payload envelope production and processing over REST/SSZ (including blinded envelopes), payload attestation (PTC) duties wired through fork choice and the validator client, execution payload bid gossip validation, EIP-8045, and a new Gloas-aware
GET /eth/v2/debug/fork_choicedump endpoint. - Beacon API: New
execution_payload,execution_payload_gossip, andhead_v2event topics (beacon-APIs #588/#590), aproposer_preferencesendpoint and SSE topic, and payload-attestation data/pool endpoints. - Performance & memory: Validator-list endpoints now stream via
ValidatorsReadOnlySeqinstead of materializing all ~2.3M validators, builder lookups use an O(1) pubkeyโindex map, the committee cache updates asynchronously, and several allocation hot paths were trimmed. - Hardening: Exact gossip subnet-topic matching, BLS signature verification on the REST attestation submission path, proposer-index and data-column sidecar bounds checks, and reclaiming per-peer rate-limiter memory on disconnect.
- Concurrency: Fixed several data races around head state and a TOCTOU in
stategen, plus a concurrent map iteration fatal in the data-availability wait. - hdiff state storage: Snappy-compressed full-state snapshots and new save-state duration metrics and logs.
- Dependencies: Updated to Go 1.26.4 and go-libp2p v0.44.0.
- Client identification: The commit-hash block graffiti now uses Prysm's correct two-letter client code
PMinstead of the stalePR. Prysm already advertisedPMeverywhere else โ the Engine API (engine_getClientVersionV1) and the Beacon API (GET /eth/v2/node/version) โ so this only fixes the graffiti, bringing it in line with the rest of Prysm and the code registered in the Ethereum client identification spec (e.g.โฆGEabcdPMe4f6). The change takes effect when the graffiti info is refreshed.
There are no known security issues in this release. Operators can update at their convenience.
Added
- github workflow to check generated go files. [PR]
- GET /eth/v1/validator/payload_attestation_data/{slot}. [PR]
- POST & GET /eth/v1/beacon/pool/payload_attestations. [PR]
- Add
helpers.BatchVerifyDepositRequestSignatureswith divide-and-conquer recovery on batch verify failure. [PR] - Add
save_state_to_cold_millisecondsmetric and log the duration of saving a state to the DB during migration to cold. [PR] - snappy compression for saving full state snapshots in hdiff. [PR]
- save state duration metrics and logs for hdiff. [PR]
- Reject gossiped execution payload bids whose slot is not greater than the slot of their parent block. [PR]
- Ignore gossiped payload attestations whose referenced block is not at
data.slot. [PR] - New Gloas-aware fork-choice dump endpoint
GET /eth/v2/debug/fork_choicethat emits one entry per(root, payload_status)tuple (PENDING / EMPTY / FULL) and exposes PTC attester counts on the PENDING entry. [PR] backfill: Log the start of the backfill at INFO level. [PR]backfill: Log a periodic INFO summary of backfill progress. [PR]- Added
execution_payload_gossipevent emission as per beacon-APIs#588. [PR] - Implemented EIP 8045. [PR]
- Add
execution_payloadevent support as per beacon-APIs#588. [PR] - Debug log when ignoring a payload envelope whose slot is not the current slot. [PR]
- Check that the block has the same shuffling before applying PB. [PR]
- adding /eth/v1/validator/proposer_preferences POST endpoint. [PR]
- adding
proposer_preferencesSSE event topic on /eth/v1/events. [PR] - REST validator client now implements
PayloadAttestationDataandSubmitPayloadAttestationagainst the beacon node/eth/v1/validator/payload_attestation_data/{slot}and/eth/v1/beacon/pool/payload_attestationsendpoints (previously returned "not implemented"). [PR] - SSZ support for GET and POST of execution payload envelope and envelope contents. [PR]
broadcast_validationquery parameter on POST execution payload envelope. [PR]- Spec-wire
WireBlindedExecutionPayloadEnvelopetypes andEth-Execution-Payload-Blinded. [PR] 202response on POST execution payload envelope when the envelope is broadcast. [PR]ProduceBlockV4returns only the beacon block when the produced block uses an. [PR]- Cache deposit request signature verdicts keyed by execution requests root. [PR]
- Hook up
payload_attestation_messagesteps and PTC vote checks in Gloas fork choice spec tests. [PR] - Add
head_v2event support to the beacon node event stream (beacon-APIs#590). The legacyheadevent is kept for backward compatibility. [PR]
Changed
- Replace linear scan in
BuilderIndexByPubkeywith an O(1) pubkeyโindex map on the state. [PR] - Update
go-libp2ptov0.44.0. [PR] - Update
go-libp2p-mplextov0.11.0. [PR] - Update signature batch. [PR]
/eth/v1/beacon/states/{state_id}/validators: Avoid full validators list (~2.3M on mainnet) materialization by iterating over validators viaValidatorsReadOnlySeq. [PR]/eth/v1/beacon/states/{state_id}/validator_identities(JSON response): Avoid full validators list (~2.3M on mainnet) materialization by iterating over validators viaValidatorsReadOnlySeq. [PR]/eth/v1/beacon/states/{state_id}/validator_identities(SSZ response): Avoid full validators list (~2.3M on mainnet) materialization by iterating over validators viaValidatorsReadOnlySeq. [PR]/eth/v1/beacon/states/{state_id}/validator_count: Avoid full validators list (~2.3M on mainnet) materialization by iterating over validators viaValidatorsReadOnlySeq. [PR]/prysm/v1/validators/head/active_set_changes: Avoid full validators list (~2.3M on mainnet) materialization by iterating over validators viaValidatorsReadOnlySeq. [PR]/healthzendpoint: Compute an average of the goroutine count instead of an instant value. [PR]- Reject and downscore peers that serve Fulu data column sidecars whose embedded
SignedBlockHeaderdoes not match the locally held beacon block. [PR] ActiveValidatorIndicesandActiveValidatorCount: Update committe cache async. [PR]- Forkchoice now tracks distinct PTC attesters via a shared voted-mask bitfield; repeat votes from the same committee index overwrite the previous vote. [PR]
- Updated go to 1.26.4. [PR]
- Run the data availability check concurrently with payload verification and EL validation when processing execution payload envelopes. [PR]
- Add tracing spans to epoch processing (
core.state.ProcessEpoch,fulu.ProcessEpoch), committee shuffling (helpers.ShuffledIndices), the committee cache (committeeCache.AddCommitteeShuffledList) andblockChain.updateCachesPostBlockProcessing. [PR] - Avoid one interface boxing per validator in
validatorsReadOnlyValandValidatorsReadOnlySeq, and per public key inAggregateKeyFromIndicesandApplyToEveryValidator, to reduce allocations. [[PR]](https://github....
v7.1.4
v7.1.4 - 2026-05-22
This is a maintenance release with significant progress on the Gloas implementation alongside important production fixes and performance improvements. There are no known security issues in this release. Operators may update at their convenience.
Release highlights:
- Gloas fork progress: PTC (payload timeliness committee) duties, payload attestation pool and gossip, proposer preferences, execution payload bid processing, builder voluntary exit handling, data column sidecar validation, observability metrics, and block proposing with P2P bids are all wired up in preparation for upcoming devnet testing.
- Memory optimization: Validator state representation compacted from ~264 to ~128 bytes per validator, saving ~300โ450 MB of heap on mainnet (~2.2M validators). This also reduces GC pressure.
- Sync committee duties fix: Eliminated expensive state replays when computing sync committee members for the current period, which previously caused periodic CPU spikes (#16686).
- Missed attestation fix: Newly-activated validators no longer miss their first attestation when using
--enable-beacon-rest-api(#16723). - Monitor indices fix: Corrected head, source, and target reporting when using the
--monitor-indicesflag (#16801). - Crash fix: Resolved a nil panic in
fetchOriginSidecarswhen the origin checkpoint block has been pruned from the DB (#16824). - State diffs (experimental):
--enable-state-diffnow supports reconstructing caches from DB via hdiff nodes. This feature is experimental and not yet recommended for production use.
Added
- added gloas support for updated index in attestation data for gRPC and rest endpoints. [PR]
- Add payload timeliness committee (PTC) attestation pool. [PR]
- Add gRPC endpoints for PTC payload attestation: PayloadAttestationData and SubmitPayloadAttestation. [PR]
- support for calling
getBeaconStateV2using pre-payload state root. [PR] - Added PTC duty support in DutiesV2 (
ptc_slot) end-to-end, including assignment computation, role wiring, logging, and tests. [PR] - Validator client PTC duty actions such as signing, and publishing ptc attestations, APIs are stubbed out in this PR. [PR]
- Add a handler for missing payloads. [PR]
- Various modification to UpdateHead and Execution Engine paths to adapt them to Gloas. [PR]
- replaces stub with call to grpc payload attestation apis. [PR]
- payload_attestation_message event triggered on grpc and gossip message received. [PR]
- Add initial Gloas observability metrics across forkchoice, blockchain, sync, payload attestation pool, validator RPC, validator client, core/gloas, and state-native. [PR]
- gRPC endpoints for attester, proposer, and sync duties. [PR]
- Add Gloas signed proposer preferences gossip topic, verification, cache, and P2P subscription. [PR]
- Gloas builder voluntary exit handling logic. [PR]
- Add gRPC endpoint
SubmitSignedProposerPreferencesfor validators to broadcast proposer preferences. [PR] - Add Gloas execution payload bid gossip topic, verification, caches, and P2P subscription. [PR]
- proposer preferences call from validator client for gloas. [PR]
- Added support for hdiff nodes to reconstruct caches from db. Use
--enable-state-diffto test this feature. [PR] - Use highest execution payload bid cache to select P2P bid over self-build when proposing Gloas blocks. [PR]
- Add
--disable-log-colorsflag to beacon-chain and validator to suppress ANSI color codes in log output, useful when redirecting logs to a file or pipe. [PR]
Changed
- Use
InitializeFromProtoUnsafeXXXinstead ofInitializeFromProtoXXXwhen possible. [PR] - Performance improvement in state (MarshalSSZ): use copy() instead of byte-by-byte loop in BlockRoots, RandaoMixes, and HistoricalRoots. [PR]
- Wire payload attestation pool into sync service and improve gossip subscriber with nil checks, structured logging, and pool insertion. [PR]
- Implement payload attestation packing in block proposer: retrieve from pool, filter by parent slot and block root, sort deterministically, and include in Gloas blocks. [PR]
- Remove unnecessary memory allocation while encoding in JSON at
GetBeaconStateV2. [PR] - Removed next epoch lookahead from PTC duties. [PR]
- Refactor Gloas
data_column_sidecargossip validation into dedicated sync and verification paths, verify againstbid.blob_kzg_commitments, and dedupe by(beacon_block_root, index). [PR] - Return nil error when ignoring already-seen data column sidecars during gossip validation to reduce log noise. [PR]
- Replace
multi_value_slice.Slice[*ethpb.Validator]bymulti_value_slice.Slice[stateutil.CompactValidator]to reduce memory usage. [PR] - Correct log in VerifyBlobKZGProofBatch. [PR]
StateByRootIfCachedNoCopynow also checks the epoch boundary state cache. [PR]- Use
state.ReadOnlyBeaconStateinstead of state.BeaconState when possible. [PR] - gRPC for proposer preferences takes in an array in the request instead of just 1 item. [PR]
- Include git commit hash in
/eth/v1/node/versionresponse. [PR] - Fix
ExecutionPayloadEnvelopesByRangeto only serve canonical payloads by walking theParentBlockHashchain backward from a successor block. [PR] - Add
ParentBlockHashfield toBlindedExecutionPayloadEnvelopeproto to enable the backward walk without loading full blocks. [PR] - Add block hash indexing for
BlindedExecutionPayloadEnvelopein DB. [PR] - Pre-allocate validatorKeys slice in insertValidatorHashes. [PR]
- changed grpc GetDutiesV2 to return proposer duties post fulu via the endpoint. [PR]
GetSyncCommitteeDutiesnow fetches the state at the current epoch for current and next-period requests to avoid expensive state replays. [PR]getFCUArgs: skip payload attribute computation when not in regular sync, since the FCU is never sent to the engine in that case. [PR]- Update go-ethereum to v1.17.3. [PR]
pingHandler: Use service context instead of background context. [PR]monitor: Move theProcessed aggregated attestationlog to debug. [PR]- Lower log level from
ErrortoDebugwhen the committee cache cannot be updated inActiveValidatorIndices. [PR]
Fixed
- Fix file descriptor leaks in
CopyFile: close both source and destination files with deferred close. [PR] - Fix unclosed HTTP response bodies and file descriptors in E2E test infrastructure. [PR]
- Allow
GET /eth/v1/beacon/execution_payload_envelope/{block_root}to resolve standard beacon block IDs such as slots andhead, instead of requiring only a hex block root. [PR] - payload attestation should only need to consume on insert. [PR]
- Fix spurious "Head changed due to attestations" log firing every tick for pre-Gloas (Fulu) blocks. [PR]
- changed /eth/v1/beacon/execution_payload_envelope/{block_root} to /eth/v1/beacon/execution_payload_envelope/{block_id} defined in beacon apis. [PR]
- Fix `TestProcessPendingDepo...
v7.1.3
v7.1.3 - 2026-03-18
This release brings extensive Gloas (next fork) groundwork, a major logging infrastructure overhaul, and numerous performance optimizations across the beacon chain. A security update to go-ethereum v1.16.8 is also included. Operators are encouraged to update at their convenience.
Release highlights:
- Logging revamp: New ephemeral debug logfile (24h retention, enabled by default), per-package loggers with CI enforcement, per-hook verbosity control (
--log.vmodule), and a version banner at startup. - Performance: Forkchoice updates moved to background, post-Electra attestation data cached per slot, parallel data column cache warmup, reduced heap allocations in SSZ marshaling and
MixInLength, and proposer preprocessing behind a feature flag. - Validator client: gRPC fallback now matches the REST API implementation โ both connect only to fully synced nodes. The gRPC health endpoint returns an error on syncing/optimistic status.
- Security: go-ethereum updated to v1.16.8; fixed an authentication bypass on
/v2/validator/*endpoints.
There are no known security issues in this release.
Added
- Use the head state to validate attestations for the previous epoch if head is compatible with the target checkpoint. [PR]
- Added separate logrus hooks for handling the formatting and output of terminal logs vs log-file logs, instead of the. [PR]
- Batch publish data columns for faster data propogation. [PR]
--disable-get-blobs-v2flag. [PR]- Update spectests to v1.7.0-alpha.0. [PR]
- Added basic Gloas builder support (
Buildermessage andBeaconStateGloasbuilders/next_withdrawal_builder_indexfields). [PR] - Added an ephemeral debug logfile that for beacon and validator nodes that captures debug-level logs for 24 hours. It. [PR]
- Add a feature flag to pass spectests with low validator count. [PR]
- Add feature flag
--enable-proposer-preprocessingto process the block and verify signatures before proposing. [PR] - Add
ProofByFieldIndexto generalize merkle proof generation forBeaconState. [PR] - Update spectests to v1.7.0-alpha-1. [PR]
- Add feature flag to use hashtree instead of gohashtre. [PR]
- Migrate to cold with the hdiff feature. [PR]
- Adding basic fulu fork transition support for mainnet and minimal e2e tests (multi scenario is not included). [PR]
commitment_count_in_gossip_processed_blocksgauge metric to track the number of blob KZG commitments in processed beacon blocks. [PR]- Add Gloas latest execution bid processing. [PR]
- Added shell completion support for
beacon-chainandvalidatorCLI tools. [PR] - add pending payments processing and quorum threshold, plus spectests and state hooks (rotate/append). [PR]
- Add slot processing with execution payload availability updates. [PR]
- Implement modified proposer slashing for gloas. [PR]
- Added missing beacon config in fulu so that the presets don't go missing in /eth/v1/config/spec beacon api. [PR]
- Close opened file in data_column.go. [PR]
- Flag
--log.vmoduleto set per-package verbosity levels for logging. [PR] - Added a version log at startup to display the version of the build. [PR]
- gloas block return support for /eth/v2/beacon/blocks/{block_id} and /eth/v1/beacon/blocks/{block_id}/root endpoints. [PR]
- Add Gloas process payload attestation. [PR]
- Initialize db with state-diff feature flag. [PR]
- Gloas-specific timing intervals for validator attestation, aggregation, and sync duties. [PR]
- Added new proofCollector type to ssz-query. [PR]
- Added README for maintaining specrefs. [PR]
- The ability to download the nightly reference tests from a specific day. [PR]
- Set beacon node options after reading the config file. [PR]
- Implement finalization-based eviction for
CheckpointStateCache. [PR]
Changed
- Performance improvement in ProcessConsolidationRequests: Use more performance HasPendingBalanceToWithdraw instead of PendingBalanceToWithdraw as no need to calculate full total pending balance. [PR]
- Extend
httperroranalyzer to more functions. [PR] - Do not check block signature on state transition. [PR]
- Notify the engine about forkchoice updates in the background. [PR]
- Use a separate context when updating the slot cache. [PR]
- Data column sidecars cache warmup: Process in parallel all sidecars for a given epoch. [PR]
- Use lookahead to validate data column sidecar proposer index. [PR]
- Summarize DEBUG log corresponding to incoming via gossip data column sidecar. [PR]
- Added a log.go file for every important package with a logger variable containing a
packagefield set to the package. [PR] - Added a CI check to ensure every important package has a log.go file with the correct
packagefield. [PR] - Changed the log formatter to use this
packagefield instead of the previousprefixfield. [PR] - Replaced
time.Sleepwithrequire.Eventuallypolling in tests to fix flaky behavior caused by race conditions between goroutines and assertions. [PR] - changed IsHealthy check to IsReady for validator client's interpretation from /eth/v1/node/health, 206 will now return false as the node is syncing. [PR]
- Performance improvement in state (MarshalSSZTo): use copy() instead of byte-by-byte loop which isn't required. [PR]
- Moved verbosity settings to be configurable per hook, rather than just globally. This allows us to control the. [PR]
- updated go ethereum to 1.16.7. [PR]
- Use dependent root and target root to verify data column proposer index. [PR]
- post electra we now call attestation data once per slot and use a cache for subsequent requests. [PR]
- Avoid unnessary heap allocation while calling MixInLength. [PR]
- Log commitments instead of indices in missingCommitError. [PR]
- Added some defensive checks to prevent overflows in block batch requests. [PR]
- gRPC health endpoint will now return an error on syncing or optimistic status showing that it's unavailable. [PR]
- Sample PTC per committee to reduce allocations. [PR]
- gRPC fallback now matches rest api implementation and will also check and connect to only synced nodes. [PR]
- Improved node fallback logs. [PR]
- Improved integrations with ethspecify so specrefs can be used throughout the codebase. [PR]
- Fixed the logging issue described in #16314. [PR]