Fedora

Install KDE Plasma Desktop on Fedora 45 / 44

Fedora’s KDE groups install Plasma Login Manager, not SDDM. It is KDE’s own greeter, and switching to it on a machine that already has a user drops you into a first-run wizard that wants to create a second account. The wizard is the one real trap in adding KDE Plasma to Fedora. The other surprise is newer, because Plasma 6.8 no longer ships an X11 session and the old plasma-workspace-x11 trick does nothing. The rest is a large but uneventful dnf transaction and a desktop that works on the first login.

Original content from computingforgeeks.com - post 4608

This guide installs KDE Plasma next to GNOME, then covers themes, KWin tiling, the login manager switch and memory use. For a fresh machine, the Fedora 45 install guide and the post-install checklist come first. Every command below was run on a fully updated Fedora 45 Workstation VM in November 2026, where the KDE group brought in Plasma 6.8.2.

Choose the KDE group to install

Two groups matter, and the difference is mostly the application set. The counts below come from --assumeno dry runs on an up-to-date Fedora 45 Workstation with only the stock fedora and updates repositories enabled, so expect them to drift a little as updates land:

GroupWhat it addsPackages (installed size)
@kde-desktopPlasma, KWin, Dolphin, Konsole, Discover, Plasma Login Manager, Plasma Setup474 (2 GiB)
@kde-desktop-environmentThe above plus the KDE apps, PIM (Kontact), multimedia and Fedora’s base desktop groups705 (3 GiB)

This guide uses the full environment, because it is what most people mean by “KDE on Fedora” and it removes cleanly later. For a dedicated KDE machine, the Fedora KDE Plasma Desktop edition installs Plasma from its own ISO instead, so you skip GNOME entirely. Pick @kde-desktop if you only want the desktop and the core apps and do not need Kontact on a GNOME box.

Install KDE Plasma on Fedora Workstation

One command does it, with about 2 GiB of downloads.

sudo dnf5 install -y @kde-desktop-environment

Our run ended with 705 packages installed and 4 more changing their install reason. Check what landed, including the two packages you should not see.

rpm -q plasma-workspace plasma-desktop kwin plasma-login-manager plasma-lookandfeel-fedora dolphin konsole qt6-qtbase kf6-kcoreaddons sddm plasma-workspace-x11

Plasma 6.8.2 sits on Qt 6.11 with KDE Gear 26.08 apps, and there is no SDDM and no X11 session:

plasma-workspace-6.8.2-1.fc45.x86_64
plasma-desktop-6.8.2-1.fc45.x86_64
kwin-6.8.2-3.fc45.x86_64
plasma-login-manager-6.8.2-1.fc45.x86_64
plasma-lookandfeel-fedora-6.8.2-1.fc45.noarch
dolphin-26.08.2-3.fc45.x86_64
konsole-26.08.2-1.fc45.x86_64
qt6-qtbase-6.11.2-3.fc45.x86_64
kf6-kcoreaddons-6.31.0-1.fc45.x86_64
package sddm is not installed
package plasma-workspace-x11 is not installed

Plasma Login Manager is installed but disabled, so GDM keeps the login screen until you decide otherwise.

systemctl is-enabled gdm plasmalogin

The first line is GDM and the second is Plasma Login Manager.

enabled
disabled

That default is the safe one, because your existing GNOME login keeps working exactly as before. Plasma is just one more entry in the session menu, so nothing changes for other users on the machine until they pick it. Leave the display manager alone for now and test Plasma first.

Log in to Plasma from GDM

Reboot, click your user, and open the gear icon before you type the password. The install adds a single Plasma entry, which is the Wayland session; /usr/share/wayland-sessions/ now holds plasma.desktop next to the two GNOME files:

GDM Session Type menu listing Plasma on Fedora 45

The first login opens the Welcome Center, six short pages on Plasma basics, over Fedora’s own wallpaper. On Plasma 6.8 its first page carries Konqi with a “30” badge, because the release marks KDE’s 30th anniversary. Click Skip if you already know your way around, or Next to walk through it:

KDE Plasma Welcome Center on the first login on Fedora 45

The default look is Fedora’s own global theme, org.fedoraproject.fedora.desktop from plasma-lookandfeel-fedora, which gives light Breeze windows with a dark full-width panel along the bottom edge. Kickoff opens from the Fedora logo in the panel or the Super key. It shows favourites, app categories, and the Sleep, Restart, Shut Down and Session actions along the bottom:

Kickoff application launcher in KDE Plasma on Fedora 45

Open Konsole and confirm the session with fastfetch (sudo dnf5 install -y fastfetch if it’s missing). The theme line here is from after the switch to Breeze Dark further down:

fastfetch --logo none -s OS:Kernel:DE:WM:Theme:Memory

Look at the Window Manager line: KWin runs as a Wayland compositor. The memory line was taken with Konsole and Dolphin open:

OS: Fedora Linux 45 (Workstation Edition) x86_64
Kernel: Linux 7.2.15-300.fc45.x86_64
Desktop Environment: KDE Plasma 6.8.2
Window Manager: KWin (Wayland)
Theme: Breeze (Dark) [Qt], Breeze-Dark [GTK2], Breeze [GTK3]
Memory: 2.23 GiB / 7.72 GiB (29%)

If the Window Manager line says anything other than Wayland, you are not in the session this guide covers, because Plasma 6.8 has no other one. Log out and pick Plasma again from the gear menu.

Change the theme in System Settings

System Settings opens on Quick Settings, which puts the theme, wallpaper, animation speed and click behaviour on one page. Plasma 6.8 offers three theme tiles there: Breeze, Breeze Dark and Automatic. Every other page is reachable from the searchable sidebar:

Plasma System Settings Quick Settings page with Breeze, Breeze Dark and Automatic themes on Fedora 45

Clicking Breeze Dark only stages the change. The page title gains an asterisk and nothing happens until you press Apply in the bottom right corner. After Apply, the windows, panel and Qt apps switch, and Fedora’s wallpaper stays where it is:

Breeze Dark applied from Plasma Quick Settings on Fedora 45

The same switch works from a terminal, which is handy in a setup script that you run on several machines. List the global themes Fedora ships:

plasma-apply-lookandfeel -l

Three are Fedora’s and three are upstream Breeze:

org.fedoraproject.fedora.desktop
org.fedoraproject.fedoradark.desktop
org.fedoraproject.fedoralight.desktop
org.kde.breeze.desktop
org.kde.breezedark.desktop
org.kde.breezetwilight.desktop

Apply one by name with plasma-apply-lookandfeel -a org.fedoraproject.fedoradark.desktop. Be aware that a global theme can carry its own wallpaper: when we re-applied org.fedoraproject.fedora.desktop from the terminal, Plasma swapped Fedora’s wallpaper for the upstream Plasma one, and plasma-apply-wallpaperimage /usr/share/wallpapers/F45 put it back. To check which global theme is active, read kdeglobals:

kreadconfig6 --file kdeglobals --group KDE --key LookAndFeelPackage

After the Quick Settings change it reads Breeze Dark, which makes this the value to check in a script before you apply anything.

org.kde.breezedark.desktop

A provisioning script can compare that value with the theme it wants and skip plasma-apply-lookandfeel when they already match, which also avoids the wallpaper swap described above.

Tile windows with KWin

KWin has two tiling layers. Quick tiling is always on: Meta+Left and Meta+Right snap the focused window to half the screen, which is how Konsole and Dolphin ended up side by side here. It needs no setup, and it’s the fastest way to put a terminal next to a file manager:

Konsole running fastfetch next to Dolphin, quick-tiled in KDE Plasma 6.8 on Fedora 45

Custom tiling lives behind Meta+T, which opens the tile editor over the desktop. The default layout is three columns with 4 pixels of padding. Each tile can be split left/right or top/bottom or deleted, an Add Floating Tile button adds a free-floating tile, and a Load Layout button sits in the top right corner:

KWin tile editor opened with Meta+T in Plasma on Fedora 45

Press Escape to close the editor and return to the desktop. On a wide monitor, a three-column layout like the default is a sensible starting point before you split tiles further.

Run X11 apps without a Plasma X11 session

Plasma 6.8 is Wayland only. KDE announced it in Going all-in on a Wayland future, and Fedora’s packages follow: plasma-workspace 6.8 obsoletes the old X11 session package, and kwin obsoletes kwin-x11. You can see it in the package metadata:

rpm -q --obsoletes plasma-workspace kwin | grep x11

Anything below 6.7.90 is replaced, which covers the last X11 builds.

plasma-workspace-x11 < 6.7.90
kwin-x11 < 6.7.90

The trap is that the release repository still carries plasma-workspace-x11-6.7.5. dnf5 repoquery lists it with kwin-x11-6.7.5, and older guides, including the earlier version of this one, tell you to install it to get a Plasma (X11) entry in GDM. On a system with Plasma 6.8 that advice is dead. Try it and dnf5 refuses quietly, because the installed 6.8 packages already obsolete it.

sudo dnf5 install plasma-workspace-x11

You get no error and no install. /usr/share/xsessions/ stays empty, so GDM never offers a Plasma (X11) entry.

Updating and loading repositories:
Repositories loaded.
Nothing to do.

X11 applications still run through Xwayland inside the Plasma session, because Fedora’s plasma-workspace requires the Xwayland server. We saw an Xwayland process next to kwin_wayland in a Plasma session on the lab VM, so most old apps never notice the change. If you have a remote-desktop tool or an old app that insists on a full X11 desktop, you have three ways out:

  • a GNOME session on the same machine
  • a lightweight X11 desktop such as LXQt on Fedora
  • an LTS distribution that still ships Plasma 6.7 or older

The same applies after an upgrade from Fedora 44. A Plasma (X11) entry you used before is gone after the 6.8 update, so check your login screen before you depend on it for a remote session.

Switch to Plasma Login Manager without triggering Plasma Setup

Plasma Login Manager is KDE’s QML-based display manager, developed under the Plasma project, with its own System Settings module. Switching to it looks like a two-line job: disable gdm, enable plasmalogin. Do only that on an existing Workstation and the next boot shows this instead of a login prompt:

Plasma Setup first-run wizard after switching Fedora 45 to Plasma Login Manager

The screen is Plasma Setup, KDE’s out-of-box wizard, which the group installs with the login manager. Its unit decides when it runs, so read it before you switch. One condition line explains the whole behaviour.

systemctl cat plasma-setup.service | grep -E 'Before|Condition|ExecStart'

It runs before the display manager whenever /etc/plasma-setup-done is missing.

Before=display-manager.service
ConditionPathExists=!/etc/plasma-setup-done
ConditionKernelCommandLine=!rd.live.image
ExecStart=/usr/libexec/plasma-setup-bootutil

When it fires, Plasma Login Manager logs in a plasma-setup system user (uid 961 on our VM, with its own full Plasma session on seat0) to run the wizard, which then creates a new admin account. GNOME Initial Setup already did that job on a Workstation, so the wizard has nothing useful to do there. Finish it and you get a second admin account you never wanted; abandon it with Restart or Shut Down and the condition line above brings it back on every boot until the flag file exists. Mark setup done before switching:

sudo touch /etc/plasma-setup-done
sudo systemctl disable gdm
sudo systemctl enable plasmalogin
sudo reboot

systemctl enable plasmalogin replaces the display-manager.service link, pointing it at /usr/lib/systemd/system/plasmalogin.service. After the reboot the greeter shows your existing user. The Desktop Session selector sits right under the password field, and it lists every installed session, GNOME included:

Plasma Login Manager Desktop Session list showing Plasma, GNOME and GNOME Classic on Fedora 45

We ran the switch both ways on the same VM. Without the flag file, the boot landed in Plasma Setup; after touch /etc/plasma-setup-done and one more reboot, it landed on the normal greeter above, so the same fix works if you have already hit the wizard. Switching back to GDM is the reverse pair, sudo systemctl disable plasmalogin and sudo systemctl enable gdm, which restores the gdm.service link. If the greeter ever fails to come up, press Ctrl+Alt+F3, log in on the text console and run that same pair before rebooting.

Compare Plasma memory use with GNOME

We used the same VM (4 vCPUs, 8 GiB RAM) with both desktops installed and GDM autologin into one session at a time. Each run was a clean reboot, 60 seconds of idle time, page cache dropped, then the “used” figure from free -m. We ran each desktop twice:

SessionRun 1Run 2
KDE Plasma 6.8.2 (Wayland)2,159 MiB1,867 MiB
GNOME 51 (Wayland)2,111 MiB1,900 MiB

The run-to-run swing (200 to 300 MiB for each desktop) is bigger than the gap between them, so on Plasma 6.8 the honest reading is a tie. Plasma’s first run is the least clean of the four, because loginctl listed two more sessions than in the other runs. Part of that swing is Plasma’s own background services: the full environment starts Akonadi for Kontact and Baloo for file indexing at login, and both showed up in our Plasma process lists. An earlier single reading on Plasma 6.7, taken after about 30 seconds of idle without a reboot, had Plasma about 670 MiB lighter, but that gap did not come back with the stricter method. Choose Plasma for KWin, the settings depth and the KDE apps, not to save RAM. If memory really is the reason you are looking beyond GNOME, LXQt is the lighter option, and GNOME Tweaks and extensions covers tuning GNOME instead.

Compare Fedora 45 and Fedora 44 for Plasma

Both releases carry the same Plasma, Frameworks and Gear builds, and Plasma Login Manager and Plasma Setup exist on both. We read both columns from the repositories with dnf5 repoquery --releasever; the Fedora 45 column also matches the installed VM:

PackageFedora 45Fedora 44
plasma-workspace6.8.2-16.8.2-1
kwin6.8.2-36.8.2-3
plasma-login-manager6.8.2-16.8.2-1
plasma-setup6.8.2-16.8.2-1
dolphin (KDE Gear)26.08.2-326.08.2-3
qt6-qtbase6.11.2-36.11.2-3
kf6-kcoreaddons (Frameworks)6.31.0-16.31.0-1
plasma-workspace-x11 (obsoleted)6.7.5-16.7.5-1

Plasma is a non-event in the Fedora 44 to 45 jump, because Fedora 44 already received Plasma 6.8 as an update. The X11 session went away on both at the same time, so an upgrade does not change anything on the desktop side. The obsoleted plasma-workspace-x11 6.7.5 build still sits in both repositories, which is why searches keep turning it up, but neither release will install it next to Plasma 6.8. If you are choosing between the two for a KDE desktop, pick on the base system and support window, not on Plasma. The Fedora 45 release notes summary covers what did change in the system underneath.

Remove Plasma and go back to GNOME

Log out and pick GNOME at the GDM prompt to stop using Plasma. If you switched display managers, put GDM back first as shown above, so the login screen doesn’t depend on packages you’re about to remove. To remove the packages, preview the transaction before committing:

sudo dnf5 environment remove --assumeno kde-desktop-environment

On our VM the preview listed 267 packages to remove and 2 GiB to free, far fewer than the 705 the install brought in, because shared libraries stay behind for GNOME:

Transaction Summary:
 Removing:         267 packages
 Changing reason:   55 packages

After this operation, 2 GiB will be freed (install 0 B, remove 2 GiB).

Drop --assumeno to carry out the removal. Plasma’s per-user settings stay behind in ~/.config, and the ones you will see first are these:

  • kdeglobals for the theme and colour scheme
  • kwinrc for KWin and tiling
  • plasma-org.kde.plasma.desktop-appletsrc for the panel and wallpaper

They are harmless under GNOME because GNOME never reads them. Delete them only if you want the next Plasma login to start from Fedora’s defaults, so you keep your tweaks if you plan to come back.

Keep reading

How to Upgrade Fedora 44 to Fedora 45 (GUI, CLI and Rollback) Fedora How to Upgrade Fedora 44 to Fedora 45 (GUI, CLI and Rollback) Things to Do After Installing Fedora 45 Workstation Fedora Things to Do After Installing Fedora 45 Workstation Enable RPM Fusion and Multimedia Codecs on Fedora 45 / 44 / 43 Fedora Enable RPM Fusion and Multimedia Codecs on Fedora 45 / 44 / 43 Cutefish OS Tested: Install, Desktop and AI Agent Computer Use AI Cutefish OS Tested: Install, Desktop and AI Agent Computer Use Best AI Operating Systems in 2026, Tested on Linux and Windows AI Best AI Operating Systems in 2026, Tested on Linux and Windows Convert any Website / Web page to desktop application using Nativefier Desktop Convert any Website / Web page to desktop application using Nativefier

2 thoughts on “Install KDE Plasma Desktop on Fedora 45 / 44”

  1. Hi,

    “my” current system is FC35 (Rawhide) and I’m a startx user… i.e., no ‘*dm” for me.

    I thought I’d give KDE another try but apparently things have changed such that /usr/bin/startkde doesn’t exist any more.

    This URL is a really nice discussion about starting(?) KDE but doesn’t include “my” situation. Can you update this URL or maybe just tell me or point me to where I might find the information I’m looking for please?

    BEST REGARDS and STAY SAFE!

    George…

    Reply

Leave a Comment

Press ESC to close