You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
This repository was archived by the owner on Mar 10, 2026. It is now read-only.
Repository navigation
This repository was archived by the owner on Mar 10, 2026. It is now read-only.
8-10 Sec delay between jobs DYMO 450 Turbo USB #5521
I've got a DYMO 450 Turbo hooked up via USB and CUPS on a Raspberry Pi 3 running Ubuntu Mate 16.04.2. It prints immediately for the first print, but has a delay of 8-10 seconds between every job after that. My buddy and I have been searching the internet for over a week trying to find a solution, but haven't found anything that works.
I've tried a suggestion you made to another user of adding the 0xVENDOR 0xMODEL unidir, but that didn't work (0x0922 0x0021 unidir).
Noted from the syslog, it appears the printer disconnects between jobs: usblp0: removed
Ok, so I did a fresh install, updated/upgraded. Installed CUPS, and the DYMO 450 Turbo using the bundled driver (which I didn't know even existed until you mentioned it). That didn't immediately fix it.
I then tried using "unidir" and this time it worked like a charm!
In summary - Raspberry Pi 3, Ubuntu Mate 16.04.5 LTS, DYMO 450 Turbo, installed DYMO with bundled driver, set quirks file with "0x0922 0x0021 unidir"
I have the same problem, or a similar one.
The tips used here do not bring improvement.
When I start a print on a LabelWriter 450 Turbo, it takes about 6-7 seconds until the print starts. The printing itself is then very slow. At the end of printing, the printer pauses for about 1-2 seconds and then advances the last piece of the label.
System is a Raspberry Pi 4 with Raspian - but I have the same problem on a current Ubuntu on my workstation.
Does anyone know about this problem or have an idea where I could tackle this problem?
I have the same problem, or a similar one.
The tips used here do not bring improvement.
When I start a print on a LabelWriter 450 Turbo, it takes about 6-7 seconds until the print starts. The printing itself is then very slow. At the end of printing, the printer pauses for about 1-2 seconds and then advances the last piece of the label.
System is a Raspberry Pi 4 with Raspian - but I have the same problem on a current Ubuntu on my workstation.
Does anyone know about this problem or have an idea where I could tackle this problem?
Did you ever find a solution to the delay @codeprofis? Just set this up and having the same issue!
Ok, so I did a fresh install, updated/upgraded. Installed CUPS, and the DYMO 450 Turbo using the bundled driver (which I didn't know even existed until you mentioned it). That didn't immediately fix it.
I then tried using "unidir" and this time it worked like a charm!
In summary - Raspberry Pi 3, Ubuntu Mate 16.04.5 LTS, DYMO 450 Turbo, installed DYMO with bundled driver, set quirks file with "0x0922 0x0021 unidir"
Thanks, Michael!
Hey @aspecteleven, what do you mean when you say you tried using the "unidir". Just set this up and the delay is really annoying!
When I start a print on a LabelWriter 450 Turbo, it takes about 6-7 seconds until the print starts. The printing itself is then very slow. At the end of printing, the printer pauses for about 1-2 seconds and then advances the last piece of the label.
On Debian 10, with bundled driver or official driver.
Tried various changes on the quirks file, unidir, no-reattach, with no success.
Does anybody have solved this one ? Any idea ?
Cheers
Same issue here. Looking forward to an answer.
I see that 0x0922 0x0021 unidir is the last line in /usr/share/cups/usb/org.cups.usb-quirks but since it's having this issue, perhaps there is a regression somewhere.
Using CUPS 2.2.10
unidir breaks the driver, as it is expecting backchannel data to be able to print. The slowness is caused by all the backchannel reads having a 2.5 second timeout value
Hi @aspecteleven, @michaelrsweet
Could you please show me how to use bundled driver for dymo labelWriter 450 Turbo?
I also have the same delay issue on Ubuntu 18.04.6
Activity
michaelrsweet commentedon Feb 19, 2019
Does the same issue happen for the bundled Dymo label printer driver?
You might try using "no-reattach" in the quirks file as well.
aspecteleven commentedon Feb 21, 2019
Ok, so I did a fresh install, updated/upgraded. Installed CUPS, and the DYMO 450 Turbo using the bundled driver (which I didn't know even existed until you mentioned it). That didn't immediately fix it.
I then tried using "unidir" and this time it worked like a charm!
In summary - Raspberry Pi 3, Ubuntu Mate 16.04.5 LTS, DYMO 450 Turbo, installed DYMO with bundled driver, set quirks file with "0x0922 0x0021 unidir"
Thanks, Michael!
Add a USB quirks rule for the DYMO 450 Turbo (Issue #5521)
Add a USB quirks rule for the DYMO 450 Turbo (Issue #5521)
michaelrsweet commentedon Feb 21, 2019
[master 76bb0a3] Add a USB quirks rule for the DYMO 450 Turbo (Issue #5521)
[branch-2.2 534af3a] Add a USB quirks rule for the DYMO 450 Turbo (Issue #5521)
codeprofis commentedon Mar 23, 2020
I have the same problem, or a similar one.
The tips used here do not bring improvement.
When I start a print on a LabelWriter 450 Turbo, it takes about 6-7 seconds until the print starts. The printing itself is then very slow. At the end of printing, the printer pauses for about 1-2 seconds and then advances the last piece of the label.
System is a Raspberry Pi 4 with Raspian - but I have the same problem on a current Ubuntu on my workstation.
Does anyone know about this problem or have an idea where I could tackle this problem?
AdrianwithaW commentedon Jun 1, 2020
Did you ever find a solution to the delay @codeprofis? Just set this up and having the same issue!
AdrianwithaW commentedon Jun 1, 2020
Hey @aspecteleven, what do you mean when you say you tried using the "unidir". Just set this up and the delay is really annoying!
labiloute commentedon Oct 13, 2020
Hi,
Still experiencing exactly the same issue as @codeprofis and @AdrianwithaW describe :
When I start a print on a LabelWriter 450 Turbo, it takes about 6-7 seconds until the print starts. The printing itself is then very slow. At the end of printing, the printer pauses for about 1-2 seconds and then advances the last piece of the label.
On Debian 10, with bundled driver or official driver.
Tried various changes on the quirks file, unidir, no-reattach, with no success.
Does anybody have solved this one ? Any idea ?
Cheers
grintor commentedon Dec 25, 2020
Same issue here. Looking forward to an answer.
I see that
0x0922 0x0021 unidiris the last line in/usr/share/cups/usb/org.cups.usb-quirksbut since it's having this issue, perhaps there is a regression somewhere.Using CUPS 2.2.10
kfazz commentedon May 21, 2021
unidir breaks the driver, as it is expecting backchannel data to be able to print. The slowness is caused by all the backchannel reads having a 2.5 second timeout value
thinhdd13 commentedon Nov 15, 2021
Hi @aspecteleven, @michaelrsweet
Could you please show me how to use bundled driver for dymo labelWriter 450 Turbo?
I also have the same delay issue on Ubuntu 18.04.6