Steam Link

Steam Link

[SOLVED] Black screen flashes
Hello,

I have tested the version 1.0.7 on my RPI 3B+ and it works perfectly on the 19" monitor from my PC.

The problem is when I want to play on the 49" TV, the app starts fine but when I connect to my Library on Steam it starts to flash black screens every few seconds.

My power supply is 5V with 3000mA. It is enough?

I tested to stream in low resolution and low quality with no effect.

I'm using wired connection.



SOLVED:
Response of Flinke:
Please check /boot/config.txt => Overscan needs to be disabled ..

In my last comment you have the details.
< >
Showing 1-6 of 6 comments
I also want to comment that the XBOX 360 controler on Non-Steam Games works if Steam its opened as Administrator.
Please check /boot/config.txt => Overscan needs to be disabled ..
3ma (.003a) is not enough

pi3 requires 1.2a (1200ma) minimum (with no usb devices), 2.5+a recomended (to power non charging usb devices)
Originally posted by _I_:
3ma (.003a) is not enough

pi3 requires 1.2a (1200ma) minimum (with no usb devices), 2.5+a recomended (to power non charging usb devices)

Sorry, I mistaken saying that my Power Supply is 3mA, it is 3000mA. I think that there are not anything more powerful. I corrected on the OP.

I'm going to try the /boot/config.txt proposal.
Originally posted by Flinke:
Please check /boot/config.txt => Overscan needs to be disabled ..

It works perfectly, thanks a lot!

What I did (for other users):

sudo nano /boot/config.txt

Uncomment the next line:

disable_overscan=1

Ctrl+x -> y -> enter. (Save and exit nano)

sudo reboot
i check for that file and I don't have it, I used retropie
< >
Showing 1-6 of 6 comments
Per page: 1530 50