Now in pre-order

Fast athletes
aren’t an accident.

Vitruve Speed

Sprints and reaction training in one system. Single-pole LIDAR, nothing to align across the lane.

Less gear, more training.

No reflector

One pole per gate

Half the tripods to carry, nothing to align across the lane, and a gate ready in seconds. Set it down and run.

Sprints + reaction

Speed and decision-making

Built-in Go/No-Go and choice-reaction modes. One system for both, with nothing else to buy.

Sun & rain

Built to handle long days in direct sunlight and rainy sessions, on the track or the field.

Ultra-portable

Less gear, less weight, set up in seconds. The whole kit fits in a backpack.

8 to 10 h of battery

A full day of testing per charge. No disposable batteries to swap: plug in USB-C and go.

One device, three ways to train

No missing sprints

No missing sprints

No chip on the waistband, no transmitter, nothing to wear. Ready-made tests in the app, or build your own. Tested in rain, sun, and sand: every condition you train in.

Dash TestFlying TestLap TestBuild your own
Change of direction

Change of direction

Set the gates around the drill and every cut gets timed: entry, turn, and exit. Deficits per side, session after session.

505 Agility Test 5-10-5L-DrillT-TestBuild your own
A true reactive start

A true reactive start, without buying another system.

The athlete waits for the gate’s cue and reacts. Decision-making under pressure, logged per athlete.

Light ChaseGo/No-GoChoiceBuild your own

Hardware built for the field

Vitruve Speed hardware
01Complete kit: gate, telescoping tripod, and hard case.
02Built-in display and touch controls on every gate.
03Dual-lens LIDAR optics: no reflector across the lane.
046.7 oz per gate: two gates in a case that fits in one hand.

From the field to the data

Every sprint, split, and reaction test is captured automatically, with nothing to write down or retype into a spreadsheet.

Data captured automatically

Profiles, history, and export

Programmable workouts

Vitruve Speed vs. other technologies

Features Photocell + reflector Chip or transponder
One device per gate ✓ ✗ ✓
Nothing worn by the athlete ✓ ✓ ✗
Reaction training built in ✓ ✗ ✗
Results on the device itself ✓ ✗ ✗
Set up in seconds, no alignment ✓ ✗ ✓
Works without a subscription ✓ ✓ ✓
Cost $$ $$$ $$

One App to Rule Them All

Vitruve is available on every platform, desktop included. Speed on the field and strength in the rack live in the same athlete profile.

Vitruve app

FAQs

Do I need a subscription to use Vitruve Speed?+

No. The gates work with or without a subscription. Sprint timing and reaction modes are yours out of the box; the subscription is optional and never required.

Do I need an emitter and a reflector to set up a gate?+

No. One device per gate, nothing on the other side of the lane. The dual-lens LIDAR optics detect the athlete on their own, so there is no reflector to place and no beam to align. Set the tripod down and run.

Does the athlete have to wear anything?+

Nothing. No chip on the waistband, no transmitter, no watch. LIDAR detects the athlete as they cross the gate.

How many gates can I run at once?+

There is no limit. Sync as many gates as your session needs, multi-channel, so you can run several sprint lanes simultaneously.

Does it work outdoors, in direct sun and rain?+

Yes. It is built to handle long days in direct sunlight and rainy sessions, on the track or the field.

How long does the battery last?+

8 to 10 hours per charge, over USB-C. No disposable batteries to swap and fewer units to charge than a photocell + reflector setup.

Does it work with Vitruve Force?+

Same app, same athlete profiles. Strength work from the encoder and speed work from the gates sit side by side in the same history and exports.

Get Started Today with Vitruve Speed

Reserve your kit and we’ll get in touch with delivery dates for your season.